The answers above all pose problems. On the surface this seems to “increase friction”, but in essence it is something else.
With appropriate waxing, these waxes do not insulate the belt and pulley but play a lubricating role. Naturally, there is no argument for improving lubrication. The friction coefficient of wax is very low. If you apply more wax, it will definitely be more slippery than without wax! The function of proper shoe polish is to improve the contact between the belt and pulley. Think of it this way: the wax helps “glue” the belt to the pulley, allowing it to transmit more power.
When you find that the belt is loose and there is no wax on hand, you can sprinkle some water on the belt to relieve the problem for a while. It's just that water dries quickly. It's not like saying: water can also increase friction, right?
Can I add water if the generator belt is broken?
This is the noise caused by friction between the belt and pulley. If you pour water, noise will occur. The sound will be temporary. After the engine has been running for a while, it will sound again. If the belt is a little loose, there will be a loud noise when the motor accelerates or the electrical load is high. Unless the belt is too loose or is aged and hardened, the friction noise will continue as described. , the belt is aged and hardened. The reason is that it needs to be replaced.
Check if it is the noise coming from the cylinder block. Otherwise, it can be determined that it is related to the car's starting system. When inspecting, check whether the belt is broken or has burrs; pay attention to whether the position of the starter is deviated, or the belt connecting the starter is aged or ccurved; check the engine at idle; Carry out timely inspections and repairs, and even minor car problems should not be ignored.
Detailed information:
The timing belt is a rubber component. As the engine running time increases, the timing belt and its accessories, such as timing belt tensioner, timing belt tensioner and water pump, etc. or age. Therefore, the manufacturer ofut engine equipped with a timing belt will have strict requirements to replace the timing belt and accessories regularly within the specified time. The replacement period will vary depending on the engine structure. Typically, the vehicle will run for 6 hours. month. It must be replaced every 10,000 to 100,000 kilometers. The specific replacement cycle should be based on the vehicle service manual.
Baidu Encyclopedia-Timing Belt
Yes. If the generator belt is broken, you can add water. Generators refer to mechanical equipment that converts other forms of energy into electrical energy. They are driven by water turbines, steam turbines, diesel engines or other electrical machines to produce electricity from water flow, air flow, fuel combustion or nuclear fission.The energy generated is convertedn mechanical energy and transmitted to the generator.