There are three reasons why the small water gun cannot be flushed: the water outlet is blocked, the water pressure is not enough, and the water gun water is leaking. The solutions are as follows.
The water outlet is blocked. Because there are gravel sediments in tap water or other waters, if you play with the water gun too much, the water outlet may be blocked by gravel, so no water cannot go out. You can clean the water outlet area so that the water outlet is not blocked and water does not flow out.
If the water pressure is not enough, if the gas in the water gun does not come out, there will be no water pressure and the water will not come out . The correct operation method is to press slowly. A few times to let the gas escape, then press it quickly, then the water will flow out naturally.
The possible reason for the pistol leakand water is that there is an air leak in the water gun. Then air pressure cannot build up in the gun, preventing water from coming out. otherwise the water will not be able to come out. You need to carefully check every part of the water gun to see if there is any leakage.
How to use the high pressure water gun
1. First, insert the rear connector of the water sprayer directly into the faucet. According to the different specifications of the faucet, select 4. and 6 rubber sealing rings respectively.
2. Gently rotate the nozzle by hand to spray the mist and water column, and the water flow reaches the spray goal.
3. The water gushes out in the shape of a column, with a length of up to 13 meters and a height of 8 meters. The mist is uniform and foggy.
4. Rotate the nozzle until it is closed when not in use. At this moment, thefaucet fitting will not fall out.