Electric fan disassembly steps:
1. Fans generally use mounting knobs and are designed with a chassis and no screws, so they are easier to disassemble. This type does not require a screwdriver, just disassemble it directly. There is also one with screws, removing which requires a screwdriver.
2. Now start the preparation work. First of all, when disassembling any electrical appliance, be sure to turn off the power supply first, as it is easy to get an electrical appliance! shock during disassembly and cleaning with the power supply connected.
3. Now start disassembly If there are screws, first remove the screws and remove the protective net. There are generally two types of protective nets: one is fixed with screws, there is no suspense, just remove it with buckles, it is enoughit to open it directly. When you remove the protective net, you will see the fan blades.
4. If you want to clean the Yang, put it in a bucket and soak it. If you do not want to wash it, place the screws that you will then remove in the protective net to prevent them from being lost. Next, remove the fan blade and remove it by turning it clockwise.
5. If you want to clean it, wash it with water anddishwashing liquidand wipe off the dust. If there is grease, you should use professional cleaning products. After washing, wipe it with a clean cloth and be sure to put it in a ventilated place to dry. Prevent water from entering when reassembling it, as an electric shock may occur.
6. After disassembly and cleaning, it's time to reinstatestall. According to the disassembly steps, you can reinstall it in reverse order. Be careful not to lose the screws, otherwise the fan blades will become unstable.
Note:
Although the steps to disassemble the electric fan are very simple, we must be careful not to lose the fan parts during the disassembly process. disassembly. You must follow the order even during installation.
How to disassemble and clean an Airmate electric fan
Unconsciously, it's almost summer again, and I feel that the temperature in summer is rising and higher from year to year. But now I can't use the air conditioner anymore, so I removed the electric fan, but after leaving it in the laundry room for one winter, the fan was already covered in dust, so I had to take it apart. and clean it again, as it needs to be dismantled and cleaned every year. I know very wellin the process of disassembly and washing.
Turn off the power supply and unplug it to ensure the electric fan is turned off. Use a screwdriver to remove the screws from the base of the electric fan and remove the base. To remove the back cover of the electric fan, you usually need to use a screwdriver or buckle. To remove the fan blades, you usually need to use a screwdriver or a buckle. Use a soft cloth or brush to clean the inside and outside of the fan, being careful not to let water get inside the fan. Cleaning completedFinally, reassemble the different parts of the electric fan.
Check whether all parts of the electric fan are installed correctly, then reconnect the power supply and turn on the electric fan to check if it is working properly. Note: When disassembling and cleaningage of the electric fan, avoid letting water get inside the electric fan to avoid short circuit or damage to the electric fan. If there is dirt inside the electric fan which is difficult to clean, you can also use professional cleaners to clean it.