Requires installation of accessories.
1. Install a circulation pump between the two water tanks to pump hot water from the upper storage area and transport it to the lower cold water storage area through pipes to form an alternating flow.
2. Install a thermostat on the top of the water tank. When the water temperature reaches a certain temperature, the circulation pump automatically begins to circulate hot water to the lower cold water storage area to ensure balanced water temperature throughout the water tank. water.
3. Install a valve between the upper and lower parts of the water tank. When the water level in the upper hot water storage area decreases, the valve will automatically open to circulate water from the lower cold water storage. to the upper hot water storage area to ensure that the water ins the water tank. Water levels are stable.
Production of electricity by circulating water is not feasible
To circulate the water, you need to prepare two mineral water bottle caps , water pumps, filter boxes, etc., drill holes in the bottle caps and connect the plastic pipes. Insert it into the hole, put the water pump into the filter box, insert the water suction pipe into the aquarium, connect the water outlet pipe to the filter box and finally turn on the pump with water.
Water cycle power generation is not feasible due to current technology and limited field factors, making it impossible to implement on a large scale. ladder. To generate electricity by circulating water, construct a suitably sized sealed water tank at a high location and connect it to a water pipe that can supply water to theground generator. Push the generator turbine to drive the generator to produce electricity. The generated water is stored in a water tank and consumes very little electricity thanks to the principle of atmospheric pressure. Let the water pump pump water to a water tank located several feet higher than the generator water level. or connect it directly to the water replenishment pipe of the sealed water tank at a high location to return water to the water tank. This cycle repeats, forming a circulating water energy production.