The water bag material used for agricultural irrigation is softer and more suitable.
Based on actual use and experience, soft and flexible water bags made of the same material as those used for agricultural irrigation are easier to use and to use. Water bags made from this material can better adapt to different terrains and environments, and can also better avoid damage due to friction or other accidental situations. Water bags made from hard materials are relatively more fragile and prone to breakage or leaking.
There are many choices when purchasing agricultural watering bags. It is recommended to choose soft and durable materials to improve the use effect and service life.
Solution to leaking irrigation water bag needle eye: Once the water belt has a hole, itCut it from the old water belt that was used before and use a soldering iron to solder the old agricultural water bag to the new one. For agricultural water belts, cut the water bag under the old water belt to a larger area than the broken copper water belt.
Buy relatively high quality glue to use on agricultural water bags. Remember to buy good agricultural water belts, otherwise some problems will occur; the leak point is at the joint. seal and retie it if necessary, or use a piece of old farm pipe to tie it around the leak.
How to use water pipes
1. The use of braided hoses should comply with the quality standards of the hose itself and try to avoid the hose being exposed to high pressure beyond its own pressure range.
2. After using the woven hose, clean it, hang the tuyaUse the liner to dry, then store it in a cool, dry place.
3. If a small hole is found in the hose during use, wrap the hose well and weave it or repair it as soon as possible after obvious damage appears, replace it immediately.
4. Try to avoid kinks and dead bends in the pipe during use, and try to reduce the pressure on the pipe during work.
5. When laying water belts, if you have to pass the railway track, you must pass under the railway track to avoid unnecessary car accidents.
Choosing a high quality pipe will make the operation more efficient and avoid water leaks and burst pipes in the pouring area. For example, a pipe that uses high-strength polyester filament, the raw material of the car seat. belts, in the form of a braided line. It has strong resistance to pressure and wear, and iThere will be no pipe bursting or leaking during normal operation of floor pouring.