The correct and economical way to wash your car

The correct and economical way to wash your car:

The correct and economical way to wash your car

Many car owners like to wash their cars. cars themselves, which is great fun and also saves a lot of car washing costs, but car washing is not a simple physical job, but many car owners have their own methods of “unique” car washes who will destroy their cars by themselves.

Step 1: Prepare the tools before car washing

If you want to do your job well, you need to sharpen your tools first. If you want to better maintain your car, have practical tools at your disposal. is essential. You need to prepare these tools before you start washing the car. Xiao An made a list of tools that everyone should check and prepare.

① Car wash water gun: high pressure water outlet, withfoam spray function. The main thing is to have the “foam spray function”! This time-saving and labor-saving car washing tool is recommended for car owners.

② Car wash fluid: The pH value is neutral and the water-based wax content is the best. Remember not to use highly alkaline laundry detergent, detergent, or soapy water instead; Although these "homemade car wash liquids" have strong detergent power, the alkaline liquid will damage the car paint, and long-term use will erode the gloss of the car paint. and accelerate the car body. Rubber parts such as tires and windows age.

③Engine cleaning agent: Professional engine compartment cleaning fluid, foam and spray types are available. Important points: Do not use other cleaning fluidsyage as a substitute~

④Other tools needed: two brushed, thick, highly absorbent car wash towels; a plastic rubber film (preservation film).

Step 2: Preparation before washing the car

Step One: Remember that the car needs to be cooled down before washing it! The advantages are, on the one hand, to avoid burns during operation, and on the other hand, to avoid deformation and damage to parts caused by alternating hot and cold temperatures.

Step 2: Clean out the debris in the car and close the windows to begin cleaning.

Step 3: Appearance Cleaning

Step 1: Prewash

First, set the water pressure of the water gun to medium and completely wet the vehicle from top to bottom; then load the prepared car wash liquid into the water gun, use the foam spray mode to foam allthe car and wait two to three minutes. After soaking, most of the sediment can be well separated from the car paint, and then use a high-pressure water gun to remove the sediment, especially the lower body, tires and chassis, which are areas where sediments are easy to hide. You must be careful during this process. If any sediment remains, the paint surface will be scratched when scrubbing ~

Step 2: Scrubbing

Lather the vehicle again and wear it. Put on gloves and use a towel dampened with car wash fluid to scrub the vehicle. The vehicle should be scrubbed from top to bottom, scrubbing and rinsing the vehicle in the following order: "roof - front window - hood - front bumper - glass on both sides - rear trunk - rear bumper - frame four-wheeled - chassis". reduce repeated rinsing.

During the cleaning process, pay attention to partsfrequently missed areas such as corners, wheel frames, license plates, fenders, reversing mirrors and antennas. It is enough that there is no moss residue or sediment on the car; body after rinsing. Riders who pursue cleanliness can participatePerform a second flush~

Setp 4: Engine Cleaning

Tips: Engine cleaning is divided into internal cleaning and external cabin cleaning. It is recommended to visit a 4S workshop to clean the engine interior and have it handled by professional service personnel. What Xiao An will explain here is cleaning the exterior of the engine cabin. Regularly cleaning sludge spots in the engine compartment can reduce the risk of spontaneous vehicle combustion, slow the aging of parts and systems, and facilitate daily vehicle inspections.

Before cleaning, youneed to protect the engine: use towels and plastic wrap to wrap and cover the generator, distributor, brake oil bottle and adapter cables in the engine compartment to prevent immersion in water. Then spray a professional engine cleaning agent evenly onto the stained area, wait two to three minutes, and wipe it with a towel once the stain is dissolved.

Series 5: Finishing the job

After cleaning the vehicle, use a clean towel to wipe away any remaining water spots. It is best not to use the car immediately. It is recommended to park the vehicle in a ventilated area and allow the water vapor to evaporate completely before use.

Solutions for car headlights that are not bright enough include: cleaning the headlights with soapy water, applying a little toothpaste to the cleaning clothe the car, wipe the surface of the headlights with a soft cloth. , etc. The reason why car headlights become dirty and blurry is that the surface of the headlights is made of polycarbonate, which is actually plastic, after exposure to wind and sunlight, it will be slowly corroded and scratched by the dust and stones present in the air. even causes yellow stains that are difficult to clean, making the car's headlights no longer shine.

Tip 1: Toothpaste; you need to prepare a towel and sponge before you start. First wipe the headlight surface with a damp cloth, then apply toothpaste to the headlight surface, use a sponge to spread the toothpaste evenly, and then wipe it with a towel. Of course, you can also use soapy water instead of toothpaste.

Tip 2: Soft towel; This tip focuses on your daily maintenance, rather than rebuilding the headlights in oneone time. You can perform this very simple maintenance when you are not driving.

Tip 3: Change the bulb; If you have used the above two methods and the headlight light is still very dim, this is not the cause of the lampshade, then the headlight bulb needs to be replaced. The brighter and more expensive the headlight bulbs, the better.

The cleaning method is as follows: 1. Clean the headlights with soapy water: washing powder and washing powder are very corrosive, so it is better to use soapy water for cleaning. Soapy water is a slightly alkaline substance. and is not suitable for cleaning. It is corrosive, mild in nature and has high cleaning capacity. It can not only remove dirt on the headlight surface, but also increase the brightness of the headlights.

2. Apply a small amount of toothpaste to the car cleaning cloth: wipe thecar headlights in a circular motion. If you find any blurred or scratched areas, you can add a little toothpaste and scrub hard then. You will notice that the car headlights gradually become transparent again. When they are almost wiped clean, rinse them with clean water and dry them with a soft cloth or paper towel.

3. Wipe the headlight surface with a soft cloth: After a long time of use, dust, particles and other impurities often accumulate on the surface of a car's headlights. Car washing cannot remove this impurity . In fact, before daily use of the car, you can wipe it lightly with a cloth to wipe off the floating dust to prevent dust from accumulating and even entering the headlights, affecting the lighting effect .