First of all, you need to determine whether the spray is diesel (diesel is very similar to engine oil after high temperature), engine oil or water is very important in this case. First of all, you need to check if the engine oil level is low. If the oil level drops, check for heavy exhaust gases. If the exhaust gases are weak, it is most likely that there is a problem with the cylinder liner or. the piston ring. If there is no exhaust gas, you If your diesel engine is equipped with a compressor, check if the gap in the compressor is too large. If there is no problem with the compressor, it is possible that the valve seal is aged.
Engine oil is not low. You need to cut the cylinder to see if the rotation of each cylinder is the same. There is a problem with the cylinder injector with less rotation.
If it is water, it generally meansThere are cracks or trachoma in the cylinder head. There may also be cracks in the cylinder liner.
Heat dissipation, noise reduction and safety considerations.
1. Heat dissipation: The generator will generate heat when operating, and the exhaust pipe is linked to the heat dissipation system. By placing the exhaust port to the side, you can direct hot air away from the main body of the generator, helping to lower temperatures and improve heat dissipation.
2. Reduce noise: The generator will produce noise when exhausting. Placing the exhaust pipe to the side can reduce the impact of noise on the operator and the environment.
3. Safety Considerations: The exhaust gases emitted by the generator contain harmful substances. Placing the exhaust port to the side can prevent the exhaust gas from directly causing damageto the operator or generator itself.