How to load water bombs into an AWM toy.
1. Originally, the balls looked like grains of blue millet, which would enlarge when soaked in water.
2. After the bullet becomes larger, find the telescope on the gun body. There is a charger switch under the telescope.
3. Open the magazine, insert the bullet, then fire.
Where is the water gun battery?
The solution to the broken water gun clip is:
Hand-fired water gun When disassembling the gun, remember to hold down the return spring and then remove the tube. Remove the two tubes directly. For the barrel tube, it is best to take it to a professional toy store for repair.
If you don't know how to disassemble the gun yourself, you can go to a professional toy store to find it and help youto repair it.
The reason why the magazine of the water gun is broken is that the bullets are too small and cannot be fired and are all stuck in the barrel. Gear wear, motor burnout, circuit problems, and all four problems above require disassembly of the gun. Parts are sold online.
On the stock
A water bomb gun is a toy gun that uses air as power to launch water bombs as ammunition. It is generally divided into guns. , rifles, machine guns, sniper rifles, etc. usually imitate the game's guns with magazines, barrels, barrels, scopes, stocks, and other accessories. There are two types of water guns: manual and automatic, with a range of up to 25 meters. The muzzle velocity of the water gun is low, and the gun is easily affected by wind, rain and otherweather conditions, causing serious direction deviations. For rear output transmitters (AR series), you can replace the battery by disconnecting the rear socket or core. For front output transmitters (AK, submachine gun or short range), you can replace the battery by removing the front handguard cover.