Water leaking from the pot into your car is the engine oil warning light. When the oil lamp alarms, stop the vehicle immediately to find the cause, troubleshoot and repair the vehicle. There may be several reasons why the oil light alarms: 1. There is not enough oil in the oil pump, which reduces the amount of oil in the oil pump, or the oil cannot be pumped because of the air, causing oil pressure. lower ; 2. The engine temperature is too high, which easily dilutes the oil.
What does the sign of a pot with a little water mean?
The pattern of drops of water in a pot in a car is the engine oil light. When the oil lamp alarms, stop the vehicle immediately to find the cause, troubleshoot and repair the vehicle.
/p>
2. If the engine temperature is too high, it is easy to dilute the oil, and the mounting clearancee will be lost considerably and the oil pressure will drop
; 3. When the oil pump parts are damaged or have gaps due to wear, assembly, etc. If it is too large, the oil pump will not be able to supply oil or insufficient oil supply
4. The corresponding clearance between the crankshaft and the large and small rings is incorrect. If it is too tight, it will increase the oil pressure, and if it is too loose, it will reduce the oil pressure; p>5. Clogging the oil filter and oil suction pan will also reduce the oil pressure.
6. The oil return valve is damaged or malfunctioning: If the spring of the oil return valve in the main oil line is tired; and softened or incorrect adjustment, the contact surface between the valve seat and the steel ball is worn or stuck by dirt, the closed valve is not tight, the return volume of hoil will increase greatly and the oil pressure in the main oil line will also decrease;
7. Improper selection of engine oil: If the engine oil is used incorrectly or the brand is incorrectly selected, leaks will increase due to the low viscosity of the oil when the engine is running, thereby reducing the oil pressure;
8. The oil pipeline is leaking and blocked.
What type of defect is an exclamation point in parentheses?
An exclamation point in parentheses is a tire pressure alarm fault. This could be a flat tire, high tire pressure, low tire pressure or a long time driving with low tire pressure.
1. The tire is flat.
It's usually very slow. If you can't tell which tire it is, you can use a pressure gauge to measure it, 2.3 for the front and 2.5 for the rear. If it is deficient, fill it upand monitor the tire pressure warning light. If it reappears after a few days, you should collect the tire and check it.
2. The tire pressure is too high
Generally speaking, the international standard GBT 2978-2008 stipulates the inflation pressure requirements for automobile tires: standard tires : reinforced tires 2.4-2.5 bar; : 2.8-2.9 bar; Maximum air pressure: should not be more than 3.5 bar, so when the tire is too high, the tire pressure monitor light will be triggered.
3. Tire pressure is too low due to long driving time.
This situation usually occurs when the tire pressure of a certain tire is too low. High-speed operation increases tire temperature, resulting in increased tire pressure. At that time, you should stop and rest, or replace the spare tire in time.
4. The pressureTires that have not been inflated for a long time become weak.
When the air pressure is lower than 1.8, the tire pressure monitoring light turns on. Check if the tire pressure sensor is normal. What does the sign of a pan with a little water mean? What is the fault of an exclamation point in parentheses @2019
The appearance of the sign of a small dripping kettle on the dashboard means that the "oil indicator " is on.
This is an indicator light used to display the status of oil pressure in the engine. Only normal oil pressure can ensure that oil is distributed to all friction parts of the engine. Too high or too low pressure will affect the normal operation of the engine and even cause damage to engine parts.
So when the engine oil light triggers an alarm, you must immediatelyStop the machine to find out the cause. You can continue working once the fault has been eliminated. If necessary, you can go to the 4S workshop for maintenance. .
Possible reasons for the “Oil light” alarm:
1. Insufficient oil volume, resulting in reduced oil volume of the oil pump or the pump does not oil due to air intake. , which results in drops in oil pressure.
2. If the engine temperature is too high, the engine oil will easily become thinner and lose a large amount of oil from the mounting clearance, causing the oil pressure to drop.
3. When the oil pump parts are damaged or the gap is too large due to wear, assembly and other problems, the oil pump will not produce oil or will not produce enough of oil.
4. The mounting clearance between the crankshaft and the large and small tiles is inadequate. If he istoo tight, the oil pressure will increase, and if it is too loose, the oil pressure will decrease.
5. Clogging the oil filter and oil suction pan will also reduce oil pressure.