Using discarded plastic bottles to make small crafts is not only environmentally friendly, but also can increase the interest of life.
Use a pencil to draw a design of the little stool on the white paper.
Use scissors to cut out a rectangular piece of plastic.
Lay the plastic sheet flat and place it on the production drawing. Use a ruler to draw lines on the plastic sheet based on the long lines on the production drawing and make marks.
Use scissors to cut the solid line shown in the picture.
Finally, insert the two pieces together and you will get a cute little chair. If you want to make a sofa, you can widen the width of the chair.
How to make a mineral water lantern by hand
The method of making a water dispenser by hand isthe following:
The first method: prepare an empty bottle of mineral water, poke a small hole in the bottom and insert a small straw into it. Prepare a paper cup or cup and place the finished water dispenser in it. Pinch the mouth of the straw with your hands (or hold it with pliers), pour the water or drink into the water dispenser, then quickly tighten the bottle cap.
Place your cup directly under the straw, gently unscrew the bottle cap and the water will automatically flow into the cup. The cup is affected. . The looser the bottle cap, the faster the water flows; The tighter the bottle cap, the slower the water flows. There will be no water leakage throughout the process.
The second method: prepare the tools and materials first. You need a bottle of mineral water, a disposable paper cup, a strawthe, a pair of hand scissors and a screwdriver. After preparing the tools and materials, use a screwdriver to drill a hole in the mineral water bottle near the base. Then cut a slit in the middle of the disposable paper cup and place the bottom of the mineral water bottle into the paper cup.
Cut a piece of straw as needed. The straw should be pliable. Then insert the straw through the hole of the mineral water bottle into the paper cup, then fill the mineral water bottle with water, and a homemade water dispenser is ready.
When using it, remember that the water will come out when you unscrew the bottle cap, because the air entering the bottle creates pressure, so the water will come out. To stop water dispensing, simply tighten the bottle cap.
Water dispenser:
A water dispenser is a device that heats or cools pure watere bottled (or mineral water) for people to drink. Bottled water is placed on top of the machine to match. to use. The water dispenser is powered by electricity. If the water dispenser has a leak, poor insulation, etc., it will be extremely dangerous. When the water dispenser pours water, it will bring a lot of bubbles, and these bubbles will carry bacteria into the bottled water.
From a functional point of view, water dispensers are mainly divided into three types: warm, iced and iced. They will provide water at different temperatures for drinking by the machine itself. cooling and cooling functions, or heating and insulation function. There are many types of water dispensers, such as nozzle type, push type and so on.
Mineral waterCan the bottle be filled with water?
How to make a water lanternmineral by hand:
1. Remove the cap from the mineral. water bottle. Use a carving knife to cut the center portion of the bottle cap and cut the edge of the bottle cap into strips. Use scissors to cut the cardboard into a circle with the same circumference as the top of the mineral water bottle, then cut several small openings evenly across the circle to enlarge the petal-shaped circle.
2. Unfold the cut circular cardboard, stick the edge to the edge of the mineral water bottle with hot melt glue, and turn the edges of the petals outward to make the shape of the petals more prominent. Pass the wool through the bottom of the mineral water bottle, tie a knot in the wool, then remove the wool from the bottom, tighten the wool and lift the lantern.
3. Put a small sticker at the bottom of the mineral water bottle and write the blessing of thea lantern to make the lantern more beautiful. Hang the lantern high, let it hang in the air, turn on the flashlight and shine the light on the lantern, the lantern will emit soft light and bring a warm feeling to the entire space.
The history of handmade lanterns
1. Lanterns are one of the important elements of traditional Chinese culture and have been used thousands of years ago. The history of lanterns dates back to the Han Dynasty, when they were mainly used for lighting and decoration. Over time, lantern-making techniques continued to improve and their shapes diversified, from traditional round lanterns to lanterns of various shapes and colors.
2. Handmade lantern crafts became popular in the Tang Dynasty, the materials used to make the lanterns were mainlyalso paper, silk and satin, as well as some auxiliary materials. These materials are relatively lightweight and easy to manufacture and transport. The popularity of handmade lanterns also promoted the development of lantern-making techniques. During the Ming and Qing dynasties, lantern-making techniques had reached their peak.
3. Traditional handmade lantern making techniques require several processes, including cutting, carving, painting, gluing, etc. Lanterns are made from a variety of materials including paper, satin, wood, glass, and more. The shapes and patterns of the lanterns are also different, including circles, squares, hexagons, etc. Patterns include dragons, phoenixes, flowers and birds, fish, insects, etc.
Not recommended
The plastic in mineral water bottles is du polyethylene terephthalate. Polyethylene terephthalate, called PET, is a high polymer obtained by the esterification reaction of terephthalic acid and ethylene glycol.
PET is a highly crystalline polymer, milky white or light yellow, with a smooth, shiny surface. It has excellent physical and mechanical properties over a wide temperature range. Long-term use temperature can reach 120°C. It has excellent electrical insulation even at high temperatures and frequencies, its electrical properties are still good, but its corona resistance. is mediocre. Creep resistance, fatigue resistance, friction resistance and dimensional stability are all very good.
The mineral water bottles commonly used at present are generally used only once. If you continue to use it, it is best not to fill it with hot water. Becausethat mineral water bottles contain harmful substancesGenerally, few chemical substances will volatilize at high temperature, but if you use a bottle to hold hot water, it will be more harmful. Good materials generally have relatively stable chemical properties, but when encountering high temperatures, they are more harmful than ordinary mineral water bottles. It is therefore not recommended to systematically reuse mineral water bottles.
A complete collection of hand-made waste mineral water bottles
1. Disposable water cup storage device
（ 1) Prepare an empty mineral water bottle.
(2) Use a utility knife to cut the head and bottom of the bottle.
(3) Cut 4 small openings in the top of the bottle, about 2_ long.
(4) Put the disposable cup in.
(5) Use the cut bottom of the bottle as a lid and cover it all the way to the bottom.
(6) Take a cup and the remaining cups will automatically go to the bottle mouth.
2. Dustproof and moisture-proof cover for power strip
(1) Prepare an empty mineral water bottle.
(2) Use a utility knife to cut the neck of the bottle.
(3) Cut off the top tapered part and set aside.
(4) Make a 0.5_ groove longitudinally along the body of the bottle.
(5) Put the power strip into the bottle, the plug wire comes out of the slot, then turn the slot to the back of the power strip.
(6) Insert the previously cut conical part into the power strip plug and attach it to the bottle body.
(7) It can basically handle a little dust or a little water.