1. Electricity production using natural gas. Natural gas is sent through a pipeline to a turbine, where the gas is mixed with air and ignited for combustion at constant pressure. The hot gas drives a turbine, which is connected to a generator via a shaft. The generator then produces electricity. current that is conducted through a conducting system to a transformer.
2. Oil energy production. The turbine is driven by hot steam. The hot steam is heated by the combustion of the fuel oil. The fuel oil is transported from the fuel oil tank to the boiler, where the heat released is absorbed by the water circulating in the pipe. superheated steam under pressure is transported to the steam turbine through the pipe. The blades turn a shaft, and the turbine shaft is connected to a generator that produces electric current. The principles of coal-fired power generation are fundamentallysimilar.
3. Hydroelectricity. Use the water level difference and cooperate with the hydroelectric generator to generate electricity. Due to the difference in water level, water can flow through the giant turbine blades at a very fast speed, and the blades will rotate at high speed (using the potential energy of the water to convert it into mechanical energy of the hydraulic wheel). , then using mechanical energy to drive the generator.) This drives the drive shaft inside the turbine and finally converts the mechanical energy into electrical energy.
4. Fa?d of the windmill