This light is the battery charge light. While crossing the waterway, the generator became water-stained and briefly short-circuited, causing it to stop producing electricity. the water dries, everything will be fine. Use it with confidence.
When the fault light turns on, the car's computer will record the error code. After detection, maintenance personnel will determine the condition of the vehicle. Also check for water in the vehicle's engine oil and use a combustion chamber detector to check for water in the vehicle's combustion chamber. Have maintenance personnel check the engine noise and see if there is any deformation of the connecting rod.
Precautions for driving in water:
When driving on a waterlogged road, you should first ensure that the vehicle has stable and powerful power, so that there is always gasor pressure in the exhaust. pipe to prevent water from flowing back into the exhaust pipe, causing a flameout. When driving, try to drive in a low gear and at a constant speed, and avoid stopping, changing gears, and turning the steering wheel abruptly, etc.
If the car stalls in water, it means that the interior of the engine has been damaged by water. If you continue to try to start the car at this time, the engine piston cylinder may break. , causing fatal damage to the engine.
This is due to water entering the vehicle's generator, causing a short circuit in the internal power generation system. When the battery light turns on, the charging system circuit is faulty, indicating. that the vehicle is not charging. If the battery indicator lights up after a while. When it turns off, it means it is back to normal. HASAt this time, simply leave the vehicle stationary and open the generator hatch to dry the generator. . The specific steps are as follows:
1. Open the cabin side door. ?
2. Pull the hood switch on the left side of the driver's leg. ?
3. Lift the engine hood upwards. ?
4. Use the support rod to support the hood. ?
5. Simply dry the generator naturally. ?