200KW generator
I=P/√3×U×0.8
I=Current unit: A, P=Power: W, U=Voltage unit: V , cosφ =power factor: 0.8
Three-phase = I=P/√3×U×0.8
Rated current is 361
How much can a 100 kilowatt generator carry? Load
100KW is the rated power, so there is no problem with 100KW load. If there is a problem, then your generator is not a qualified product.
How much load can a three hundred kilowatt generator handle?Look, there are some differences in the different weights. Take Cummins as an example, the model is HQCM300XNGF as an example. The specific parameters are the basic information of. the generator set: Unit model 300KW diesel engine Chongqing Cummins diesel engine Model NTA855-G2A Number of cylinders 6 Common power 313KW Standby power 343KW Rated fuel consumption (g/KW.h) 196 Bore diameter.
Whatthe load can a 250kW generator handle?I don't know what type of diesel engine your generator has? Generally, a power factor of 0.8 is written on the generator, that is, the actual 250 kW generator is 250 x 0.8, which is equivalent to 200 kW. The actual situation may not be 200 kW, which means the maximum power is 180 or 190.
We also need to consider the starting problem of electrical appliances. Many electrical devices have a large starting current. For example, the starting current of a general motor is about 4-7 times the rated current. The generator is too small and cannot start.
What is the maximum load that each phase of a 7.5 kilowatt three-phase generator can support?It depends on the tension you are in. You can test the motor current. Does not exceed 15A, it can be used normally.
What chHow much can a 400 kW diesel generator handle?A 400 kW generator can provide an active power of 400 kW. The capacity of the unit should be 500 KVA and the reactive power should be 300 KVAR.
How many electrical appliances can a 120 kilowatt generator carry?
It can work for a long time with a three-phase balanced load of 120 kilowatts if the three phases are unbalanced; The largest phase cannot be overloaded at this time, the carried load is only the sum of the three phases.
How much load can a 500 kilowatt gasoline generator handle?This cannot be calculated simply based on power. Instead, it should be calculated based on the rated current. That is, the total current of the load cannot be greater than the rated output current of the generator. In the case of a purely resistive load, the puissence of the load can be equal to the power of the generator. But not when the load is purely resistive. Don't look at the power but at the current.
How many 3 phase motors can a 50 kW generator drive at full load for 8 hours?Without special measures, a 50kW diesel generator can drive a maximum of 12KW motors due to the following reasons:
1.The starting current of the motor is 4-7 times the current nominal. It is already very difficult to start an 8 kW motor normally. The start-up time is long and the generator can handle it. The diesel engine is overloaded and is at the limit. to stop.
2. Take some measures to reduce the starting current, which can slightly increase the motor power:
a. Use star-delta startup conversion,
> b, after starting without load, then load again,
c. Use the auxiliary devicesoft start area to help with starting, etc.
How many aerators can a 23 kW generator carry?Based on a 3KW unit, a maximum of 6 units can be connected. It cannot be started at the same time. It is best to start a group of 2 units and start one at a time.
How many kilowatts of electrical appliances can a 15 kva generator carry?Depending on the power factor of electrical appliances, 10 to 13 kW is generally acceptable