Will not cause leaks. Washing machines have induction circuits. For washing machines with high safety requirements, a ground wire will be added. If there is an electricity leak during washing machine operation, some washing machines equipped with leakage protection equipment will automatically stop spinning. ?
It will not cause electricity leakage in the washing machine, because most washing machines have induction circuits, and most washing machines sold in the market will be equipped with a ground wire, which means you can do this. ensure safety, even if there is water on the floor, it will not cause electricity leakage in the washing machine. ?
1. There are many reasons for electricity leaks in the washing machine, but they are all caused by damage to the equipment. For example, the shell of the washing machine is leaking. by a leakelectricity at a certain point in the washing machine circuit. If a certain line in the circuit leaks, the electricity in the line will directly cause the shell to charge, and then leakage will occur. ?
2. Or there is a problem with the washing machine plug, causing a leak. This situation often occurs in washing machines that have been used for many years. This is a problem of circuit aging. time, the circuit wire must be replaced. Since the washing machine will come into contact with water during daily use, the protection against electricity is very good. If there are water stains on the floor, it will not affect the normal use of the washing machine, so there will be no leaks. issue. Users can use it with confidence.
Water entering the mezzanine of the pulsator washing machine will not affect the use, but there will be other effects.About the washing machine: 1. First check whether there is water in the electrical components. If there is water in the electrical components, it should be dried before turning on to avoid burning the electrical components due to short circuit and risk of electric shock. 2. Since the washing machine is often exposed to water, the bottom of the washing machine should be dried. the washing machine will be rusty and rotten, but there is no problem with using the washing machine; 3. Environmental issue. Suggested treatment methods: 1. First turn off the power supply, open the laundry, move it to a ventilated place to dry, and wait for it to dry. You can also turn on a hot hair dryer such as an electric fan and blow it for about half an hour until it dries. Be careful not to place the heating fan too close to the washing machine. Nowadays, washing machinesare usually equipped with triple-proof technology, i.e. waterproof, dustproof and electrically proof. Simply turn off the power supply and leave the washing machine empty for a while. If possible, it is best to move it. in a ventilated place and leave it empty. 2. There will be rust and rot at the bottom of the washing machine, but there is no problem using the washing machine. If possible, you can ask maintenance personnel to inspect it before using it, so that the safety factor is higher. 3. If you can put it somewhere else, don't put it in the toilet. You can consider putting it in the kitchen. All drum washing machines drain water. The drain pipe must be equipped with a curved bracket that can be pushed into place. the drain pipe. If the water is leaking, if the hose is not long enough, you can buy an extension so thatthe drain hose can be hung on the bucket and the water is discharged directly into the bucket. Simply use a tee to connect a washing machine faucet next to the faucet.