Shanghai Taiyi Cooling Tower Factory will answer for you:
If the newly purchased cooling tower has poor performance, the flow rate should be selected to be low.
If it was used well at the beginning, the cooling tower may have been used for a long time and there is a lot of waste blocking the cooling tower.
Analysis of the reasons for insufficient cooling effect of cooling towers:
1. The valve is too large, resulting in excessive circulating water volume or inadequacy in the selection and purchase of the cooling tower;
p>
2. Part of outlet holes of the water distribution pipe are blocked, causing deviation
3. The ventilation pipe is blocked, resulting in insufficient ventilation, or the fan speed is low;
4. Fill is partially blocked, causing deviation ;
Solutions to insufficient cooling effect of cooling tower:
1. appropriate amount of water, or replace the cooling tower with a corresponding capacity;
2. Remove the blockage in the water distribution pipe
3. Clean the ventilation duct, adjust the fan size; or increase fan speed;
4. Eliminate filling blockage or modify the water spray filling structure of the cooling tower;
There is a disproportionate relationship between auxiliary engine cooling water temperature; and reducing coal consumption. So-called auxiliary machines are unimportant auxiliary machines. As long as the cooling water does not exceed the temperature, it will not affect production. Even if the water temperature is high, it will be treated in time. Therefore, the temperature of the cooled waterThe reduction of auxiliary engines is linked to the reduction in coal consumption, but the impact is so small that it cannot be calculated. The main economic indicators that greatly affect coal consumption are: circulating water temperature, condenser vacuum, exhaust gas temperature, oxygen content, plant power consumption rate, the carbon content of fly ash, steam temperature and steam pressure gap, etc.