Hello, there is no need to disassemble the engine or gearbox in case of water leaking from the engine. The common engine water leak problem is water leaking caused by problems with the position of the cylinder seal or the water pump seals and water lines. Among them, water leaks caused by damage to the water pump are the most common. It is common that as long as there is no aging or disassembly in the pipe joints, there will generally be no water leakage. disassembly of the engine. As long as accessories are removed, they can be replaced without any impact on the life of the engine itself or the value retention rate of used cars. If the motor leaks, it must be repaired in time to prevent water leakage or water shortage is too serious, causing the motor to overheat, which will eventually lead to a serious accident of the motor pulling the cylinder and retaining theroof tiles. .
Low quality car glass water or tap water can be used as glass water. Very easy to freeze in winter.
In winter, we need to replace the water glasses in the car with anti-freeze water glasses suitable for winter. Many drivers don't know how to replace the water glass, including the following process:
1. Use the unfrozen glass of water that hasn't been used before and don't mix it. There are two methods. The first is to turn on the switch and spray everything. The second is to go to the repair shop and remove it.
2. Open the engine hood, find the kettle with a glass of water, usually equipped with a wiper symbol, then unscrew the lid.
3. Then pour the water from the anti-freeze glass directly into the filling hole until the liquid reaches the filter position. Currently, many carsres are also equipped with a scale. Do not overfill the kettle at this time, otherwise it will freeze easily if you encounter poor quality glass water. Fill the kettle completely.
4. If you accidentally spill glass water on the engine or circuit, you do not need to start the car immediately, but you must wait until it is dry before starting, otherwise it may damage the engine. circuit.
5. After filling, the lid should be tightened to prevent the water in the glass from mixing with impurities or the water from the overflowing glass from damaging the circuit.
When choosing antifreeze glass water in winter, you should choose glass water suitable for the local temperature. You should choose glass water with a freezing point more than 10°C lower than the local minimum temperature. . The most common types of antifreeze glass water on the market are -20°C et -35°C.
One million subsidies for car purchases