The combustion of Accord oil is mainly caused by piston rings stuck with carbon deposits. Relying on adding high viscosity engine oil to extend life is only a temporary measure that only solves the problem, but not the root cause. Engine power is low because oil participates in combustion, forming more carbon deposits. Carbon deposits in turn increase the level of oil combustion, thus forming a vicious cycle. Excessive carbon deposits will clog the fuel injector, causing poor atomization and combustion, leading to increased fuel consumption and reduced power. If this continues, the cylinder wall will be strained, or even the cylinder will explode, and eventually the engine will have to be dismantled for an overhaul.
Four reasons to burn engine oil
1. If you do not clean theoil circuit for a long time or if you do not clean the oil circuit effectively, use detergents as desired, use detergents. and use effective detergents. They are two different things;
2. Antifreeze replacement cycle is too long or not replaced at all;
3. The engine oil replacement cycle is too long;
4. Long-term or frequent short-distance travel.
A vehicle that burns engine oil at the four points above must occupy one or all four points.
How do piston rings stick?
The principle of piston ring sticking starts from the oil circuit. The engine oil can withstand the temperature of 110 degrees and the high temperature caused by the temperature. long-term impurity of the oil circuit, causing the engine oil to remain at a temperature of 120 degrees or more for a long time, so that theengine oil runs out ahead of time. The small holes in the oil ring will be dried, crusted and stuck in the long term. One cylinder is blocked every 5,000 kilometers per liter of engine oil, at this time the operating conditions of other cylinder blocks will also begin to be poor. Soon all four cylinder blocks will be blocked and. this will become one liter of engine oil every 1,000 kilometers or even hundreds of kilometers. Therefore, to solve the problem, one must start from the root of the oil circuit, which is the only way to eliminate the root.
Solutions to fuel oil combustion
In the inertial thinking of car enthusiasts, they always think that fuel oil combustion should be solved by overhaul. This will not only lead to high maintenance costs, but also costs. the burden of the vehicle. Unpredictable risks and depreciation losses caused by overhaul. Destroy the waterproofingand engine precision. In addition, it is possible to burn oil again after tens of thousands of kilometers, so engine overhaul is not sustainable.
The current non-dismantling technology is very mature and gradually accepted by the majority of car owners. In particular, Si Youpu's non-destructive repair products containing patented PNF technology have completely eliminated the technical constraints of having to go to an auto repair shop to operate without removing a single screw, the car owner can operate it himself. can repair and release stuck piston rings and burn engine oil while driving, and the effect is significant.
The eighth generation Accord starts at 1,500 rpm and drops to 1,200 in one minute
The amount of oil between the upper limit and two points on the dipstick eighth g of Accord 24 oileneration depends on the specific model and engine displacement. Generally speaking, the amount of oil between the upper limit of the oil dipstick and the two points refers to the range of the oil dipstick notch, which is generally about 1 liter. The reason is that when the engine is running, the engine oil lubricates and cools between the various components. As the usage time increases, the engine oil gradually turns black, becomes thinner or diminishes due to wear. Therefore, the vehicle's engine oil should be changed regularly and maintained at the appropriate level to ensure normal operation and protection of the engine.
ExtensionExhibition Content: When maintaining your vehicle, it is very important to check and change the engine oil in time. Engine oil not only lubricates and cools the engine, but it also cleans and prevents corrosion of metal parts.s. The appropriate amount of engine oil can maintain normal engine operating temperature and performance, extend engine life and improve fuel economy. Therefore, car owners should refer to the vehicle manual or consult a professional technician to understand the type and capacity of engine oil required for their vehicle, check the engine oil level regularly, and refill or replace the engine oil. timely engine oil to ensure good health. engine operation.
It is normal for the idle speed to be high when the car is cold. In order to allow the engine to reach the optimum operating temperature as quickly as possible, when the car is started from cold, the engine idle speed will be increased based on signals such as the water temperature sensor. Once the car has warmed up, the engine. the speed will gradually decreaseement up to approximately 800-1200 rpm. If the vehicle speed exceeds 1,500 rpm when starting and cannot return to normal for a long time, there may be problems, such as a malfunction of the throttle position sensor.