The motorcycle battery has been used for almost five years. If the battery is discharged, you can remove it and charge it with a charger. As long as it can still be used normally after charging, it will be. GOOD.
If the battery still cannot be used normally after charging it with a charger, the battery may be damaged and cannot be charged, or may no longer hold the battery. energy, you can therefore only replace it with a new battery. If it is a regular lead-acid battery, you can check if it is low on electrolyte. If there is a lack of electrolyte, distilled water or a special filling solution should be filled. Do not refill the original electrolyte solution or tap water. If it is a maintenance-free battery, there is no need to check and add fluid.
If the battery often loses power, in addition to possible damage to the batterye, you should also check if the motorcycle's magneto is not producing electricity or has insufficient power, if the rectifier is not charging or has insufficient charging capacity and if the vehicle's electrical devices are working properly, a Excessive power consumption, if there are leakage faults in the vehicle's circuits and electrical components, etc., will cause frequent loss of battery power.
How to Fix Insufficient Battery Voltage
You can use a charger to charge, or you can choose to quickly charge the battery. Connect the electrodes of the batteries of the two cars together with charging cables, then start the other car and let its engine idle. Then try to start your car. If the battery is low, the car should start quickly, then the generator will charge the battery.
It can alsoent be charged by the generator while the car is running. There is a part connected by several belts under the hood, which is the car's generator. After starting the car, when the engine is running, it runs the generator and generates current. Current flows through the vehicle's voltage stabilizing transformer. part is supplied to the vehicle's electrical devices, the excess will charge the battery.
Precautions for using car batteries
Do not use the starter continuously. Each use should not exceed 5 seconds. Rest for 10 to 15 seconds after two starts. The battery discharge level should not exceed 25% in harsh winter and 50% in summer.
A battery with sufficient electrolyte should not be left undercharged for a long time and should be charged regularly, otherwise it will be scrapped.
When loadingthe battery, the voltage should be neither too low nor too high. Generally, the standard voltage for 12V charging is in the range of (13.5~14.5)V, and the standard voltage for 24V charging is in the range of (28~29.9) V.
Reference for the content above? People's Daily Online - Several ways to "save yourself" when the battery is suddenly discharged
Pacific Automotive Network If the battery voltage is insufficient, you can use a portable. It is not possible to charge with a charger. It's not enough to rely on a car generator for charging. For example, the charging method for 12V80Ah is: charging with constant voltage and. current limiting method, charge with a constant voltage of 14.8V and limit current of 20A for 16 hours, then charge with a constant current of 4A for a total of 4 hours.
In general, the lifespan of a battery of vcar is about 2-3 years. If it is used for a long time, its energy storage capacity will deteriorate and there will be a phenomenon of no energy storage, then you can consider replacing the battery with a new one. If the electrolyte is insufficient, you can add an appropriate amount of distilled or purified water into the battery, but tap water cannot be used, this will cause serious self-discharge of the battery.
The voltage of the car battery is generally 12V, but the voltage of 12V is not fixed. Under normal circumstances, the battery voltage before starting the car is between 11.8V and 12.8V, and the battery voltage after starting is between 13.2 and 14.8V. If the battery voltage is lower than 11.8V, it means the voltage is insufficient; if the voltage is lower than 10.8 V, it means the battery is discharged andthat it must be charged and activated with a charger in time. . Additionally, if the battery voltage is lower than 10V, the battery cannot be charged. At this time, you need to use the high-strength repair tool of the repair instrument to increase the voltage above 10V, so that the battery can be charged. charge.
(Photo/Text/Photo: Zhang Huangbin of Pacific Automotive Network)