The output voltage of the 100 MW unit is 10.5 kv. The generator output to the main transformer is usually connected by a rectangular bare busbar and a steel-core aluminum stranded wire combination busbar. Once the main transformer is boosted, a 110kv or 220kv is activated. A steel-core aluminum stranded wire busbar is used. I saw the cable exit. Cable output is of course possible, but the cost is high. The 110 kV cable is approximately 15 centimeters in diameter and two or more cables can be used in parallel.
How thick is the transformer output cable of a 100,000 kilowatt thermal power generation unit?
Introduction How thick is the transformer output cable of a 100,000 kilowatt thermal generator? The output voltage of the 100 MW unit is 10.5 kV. The output wire from the generator to the main transformer is generally a bare rectangular bus bar and a steel core. alumi