Generally speaking, the full electricity charge of 3KW costs about 6 yuan per hour, and one kilowatt hour of electricity is equivalent to about 2 yuan.
The fuel consumption of small diesel generators is related to the following two factors:
p>1. Fuel consumption rate. Diesel generators of different brands consume different amounts of fuel.
2. The size of the electrical charge is important. the larger the throttle and the higher the fuel consumption, the smaller the load, the lower the relative fuel consumption.
Instructions for converting the fuel consumption calculation units of small diesel generators:
1L (liter) = 1000ML (ml)
1L (liter ) = 1 liter
1KW (kilowatt) = 1000W (watt)
1KG (kilogram) = 1000G (gram) = 1L (liter)
1G ( gram) = 0.001L (L)
Note: Assuming the same specific density, the proportionion of water and diesel is approximately 1: 0.84-0.86, so one liter of diesel is equivalent to 0.84-0.86 kg, 1 L = approximately 0.85 kg.
Most small diesel generator manufacturers' parameters use G/KW.H, which means how many grams of oil a kilowatt consumes per hour. If you change this unit to how many liters, you will immediately know how. many liters of fuel are consumed, so you can also know how much you spend per hour; some manufacturers also directly indicate L/H, that is, how many liters of fuel are consumed per hour.
Honda 10 kW generator
Lubricating oil capacity: 1.7 L
In terms of oil filling quantity, vector filling is necessary to avoid the idea that the more oil added, the more There is Typically highest and lowest oil levels on the inside wall of an engine's oil filler port. The levelmarked oil can neither exceed MAX nor be less than MIN. As the oil level decreases, the amount of oil in the engine. decreases, which will increase the oil charge and cause oil fouling due to heat. The more serious the situation becomes, it not only weakens the lubrication performance, but also increases fuel consumption. oil temperature.
Therefore, fuel consumption increases as the oil temperature increases. It is most dangerous to run the engine when the oil level is at the lowest point MIN. Maintaining the oil level at the highest point (MAX) will result in oil foaming, resulting in insufficient lubrication and significant wear. Foaming oil will also lead to increased fuel consumption. It is therefore recommended to maintain the engine oil level between levels. MIN and MAX brands and close toMAX one third of the position
.