After buying a faucet, the biggest problem is installing it. First you need to distinguish the type of faucet. Installation requirements will be very different depending on the area. When using, you need to understand the height of the faucet. and the proportion should be harmonious, so that you can To accelerate the flow of water and ensure the convenience of daily water use, let's see with the editor, how to install the faucet ?
1. How to install the faucet
1, Install the sink faucets. When I buy a sink with a single handle, I also have to pay attention to the installation of the faucet, down to the diameter of the spout. Currently, most faucet installations are done with hard water. Before installation, pay attention to the height of the water pipe. About 30cm down. When installing, be sure to choose a professional angle valve for installation. Thereangle valve should be attached with hot and cold water pipes to the wall socket. If the angle valve is a single tap, you can use tubing to extend the connection. It is best not to use other water pipe fittings, otherwise it will easily leak due to high water pressure.
2. Install shower and bath faucets, if you are purchasing bathtubs, showers, wall-mounted faucets, etc. In your home, you must choose the right height when burying your water pipes. The distance between the hot water pipe and the cold water pipe is more than 20cm. When hiding a bathtub or shower, it is best to bury the faucet in the wall. Before considering pre-recessing, it is necessary to determine whether the thickness of the bathroom wall meets the requirements. If the walls are too thin, the scroll cannot be buried. When we buried him previousment, the plastic cover should not be easily removed to avoid damage to the valve core during gluing and other tasks.
3. Installing the thermostat. Before installing the thermostat, first check which side of the water pipe is hot water and which side is cold water. Especially when hot and cold water pipes are taken, do not make wrong connections to avoid affecting the normal use of the future wrench. Gas and solar water heaters are not suitable for thermostatic faucets because the water pressure is usually low. Before installing your thermostat, consider installing hot and cold water filters. Look at the structure
2. What are the key points for choosing a faucet
1 When choosing a faucet, you should first look at the structure of the faucet, because there are. many types of faucets. When choosing a faucet, you should always choose a faucet model inbased on your preferences and needs. If classified according to its structure, the faucet is a three-type faucet with a ceramic shank handle and a 90° switch faucet with a spiral stabilized rubber. These three keys are very easy to use, depending on which ones you prefer.
2. Look at the surface treatment. Everyone should look at the key surface. Do not assume that key surfaces are the same. In fact, this is not the case. The surface of the key is painted in different colors. Everyone chooses the key. In addition to looking at our personal preferences, we must also consider our own requirements and the general decoration of the interior of the room, both of which must coincide. When choosing a faucet, try to choose one with relatively mature processing technology.
3. Look at the quality. When choosing a faucet, you should also look at theway the faucet handle turns or twists to see if it is light and flexible and doesn't have any stuck resistance. If the faucet has resistance, there will be problems with the quality of the faucet. If the faucet is not assembled correctly and debugging is not sufficient, the quality of the faucet will be poor.
It is necessary to master certain methods for installing the faucet, so that it can be easily operated and used satisfactorily.