The water tank of the diesel generator is leaking and cannot be used. The water tank of the diesel generator set is an important accessory of the water-cooled engine. As an important component of the heat dissipation circuit of the water-cooled engine, it can evaporate the heat energy of the cylinder and prevent the engine from overheating. . When it is found that there is a small amount of cracks and leaks in the inlet and outlet pipes of the water tank, you can wrap the leak tightly with tape or a cloth coated with soap , then tie it tightly with a thin wire, wrap it outside with tape, then tie it tightly with a thin wire. This is a very common treatment method. During processing, plastic pipes of the same diameter are used, which can also be used temporarily to replace damaged rubber pipes.
1. Open the vi valvedange and the auxiliary water tank cover, which will help drain the cooling water into the large and small water tanks, cooling system pipes and the engine.
2. Facing the front of the car, use a vise to open the drain valve counterclockwise. It is recommended to drain the water when the car is cold to avoid burning your hands.
3. There is a drain screw on the beam below the water tank. Simply unscrew it and the water will flow out. Remove the old water tank after emptying it.
4. Install a new auxiliary water tank. The length of the pipe head is the same as the pipe diameter and corresponds directly.