Air conditioners and trailer parking generators typically use diesel engines as power sources. If you need to add diesel, you can follow the following steps:
1. Find the diesel fill port. Typically, the diesel fill ports on air conditioners and trailer parking generators are located on the side or rear of the engine compartment. They can be found according to the vehicle manual or the body logo.
2. Use the best. Before adding diesel, it is best to use the fuel tank to avoid mixing diesel of different grades or types, which will result in incomplete combustion and black smoke.
3. Open the fuel port. Before opening the refueling port, it is best to prepare the diesel fuel storage tank and diversion equipment to prevent oil from spillinge, does not pollute the environment or cause physical injury. In addition, the area near the oil filler port should be cleaned first to avoid the ingress of impurities.
4. Add diesel. Fill the diesel into the filler port until the oil level is close to the filler port, then you can stop filling.
5. Close the fuel port. After adding oil, remember to close the oil fill port and clean as many oil stains as possible to avoid staining or contaminating other parts. When adding diesel, pay attention to safety and avoid leakage and fire. At the same time, it is recommended to replace the diesel filter element regularly to maintain the cleanliness and proper combustion of diesel fuel.