1. Attach the top and bottom columns first, then draw a straight line at the top between the two columns, then place the middle column on the step (note that you can move the column back and forth on the step. Place the studs at the same height as the line,), use a marker to draw punch marks in the stud mounting holes, then drill holes to attach the studs.
2. If the floor has been paved with tiles or marble, you can first use a glass drill to drill holes. Before drilling, you can use modeling clay to make a circle around the hole to catch the water. it's better.
After drilling the glass drill bit, use an impact drill with a diameter of 12mm to drill the hole. If the foundation is wooden, you can directly fix the column with self-tapping screws.
3. Use a thin tap water pipe to insert the wire wireage, then break it with your hands where it needs to be bent.
This saves effort.
For wire drawing with a diameter greater than 12mm, you can use a special wire drawing bracket to bend it. When threading, first measure the position of the wire drawing fold. After holding the fold, you can put. the thread hole on the wire drawing. Once the wire drawing is in place, attach the thread hole on column 4. Attach the armrest: First measure the area that needs to be folded and hold the part of the armrest that needs to be folded. be folded with the hot folding blanket and heat it for 15-20 minutes, until the armrest becomes soft. It can be folded.
(If the hot folded blanket is very long, you can loosen the hot folded blanket to a place where you do not need to hold it.) Remove the hot folded blanket, place it handrail. on the post, then use the prep stovere in advance. Apply a cold towel to the armrest to allow it to follow the curve.
Wipe several times until the armrest takes shape.
If the handrail has scratches during transportation or daily use, which affects its appearance, you can also use a heating blanket to heat and wipe it to remove the scratches.
5. Finally, install the handrail plug and the draft plug, tighten the jack that needs to be tightened, and that's it.