How to say water sludge impression in English

(on a soft surface) print (the present participle of print); write in print; expand (photo)

Water mud printing Mortar printing The above are online translations, two types. The difference in printing is as follows: 1. Water mud printing, called water mud, is a kind of water-based mud. It doesn't have a strong feel when printed on clothings, and it doesn't have a strong feeling. The covering power is not strong. It is only suitable for printing on light colored fabrics. The price is relatively low and it is relatively low for different types of printing. original texture of the fabric (less impact), it is therefore more suitable for printing designs on large surfaces. English name: water print Water sludge is soluble in water so it can diffuse/penetrate onto cotton or polyester-cotton fabrics. , it can only print dark colors on light-colored fabrics. For fabrics darker than the water slurry itself, water slurry printing has no effect. For now you need to use glue.

Water slurry. has less impact on the feel of the fabric than glue. It may be relatively soft and gentler than glue, but it is worse than reactive printing. There is also a sensation that may be close toeffect of reactive printing, called. Imitation reactive printing, and the price is much more expensive than ordinary water-based printing.

2. Glue printing Glue printing refers to color separation. Overprinting is a method of printing color paste onto fabric. cross-linking agent binder (glue) in the color paste to stick the color paste to the fabric surface. The emergence of glue and its wide application after water paste, due to its coverage, flexibility is very good, so dark clothes can be printed with any light color, and it has a certain shine and three-dimensional effect, which makes ready-made clothing look more high-end, so it quickly became popular and can be printed on almost any printed t-shirt. used. But because it has a certain hardness, it is not suitable for large-scale solid patterns.face. It is best to print large-area designs with water slurry and then embellish them with glue. It can solve the hard glue problem big time. OK areas.Highlight pattern overlay; another method is to dig a large area of ​​solid pattern to create a bad effect, but it will still be a little stiff when worn, so it is better to combine water and glue to solve the problem. large area printing problem Better. There are glossy and matte surfaces, soft to the touch, thin, environmentally friendly and stretchable.

As the glue is relatively dense and sticky, the number General printing colors are limited. In rotary screen printing and flat screen printing, the number of color sets should generally not exceed 5 sets, otherwise the printing surface will be easily uneven and the color will be uneven (because the color printedon the front side has not completely dried when the color on the back side is printed), and when cutting. In sheet printing, the glue printing method is different from that of fabric printing. You can wait for the previously printed color to dry a little before printing. the next color set, so you can print more colors and keep the brilliance and color of the printed part unchanged.

I hope this helps~