The water heater does not produce water. It depends on the type of water heater it is. The following is an explanation of our common combustion water heaters and electric water heaters. Please pay attention to: Rongji igniter and gas water heater do. does not produce water
1. Heat The water tap is not turned on or broken Many people are confused when using household appliances. They turn off the tap and forget to turn it on, or it is caused by a family. I would like the member to turn it off. Just turn it on and everything will be fine. If the hot water valve is broken, simply go to the hardware store, buy one with the same interface specifications and replace it.
2. The nozzle may be blocked. If the water is dirty and contains many impurities, it is easy for some dirty objects to block the nozzle. Pay attention to cleaning at ordinary times.
3. There is a problem with the vanne mixer or it is broken. It is not recommended to resolve this situation on your own. You can find professionals to come to your doorstep. 4. There is a leak problem in the pipe. For example, there is a leaking problem in the mixing valve, so the hot water is leaking directly. Of course this will be very obvious.
2. The electric water heater does not produce water. 1. It is not adjusted correctly. If the temperature is set at the lowest setting, it may not produce hot water.
2. There is a problem with the thermostat. Some of those with insurance protection cannot operate normally. These require professional help.
3. The water pipe is blocked. The electric water heater allows the cold water to raise the bubbles of hot water. If the water inlet is blocked, of course there will be no water.
4. The water line pressure relief valve is clogged, or the filter is dirty, or the vanne water mixer is broken. Replace it directly.
There may be other reasons for the lack of hot water in the electric water heater, such as a breakdown of the heating system, which cannot heat normally, so naturally there is no no hot water, this may also be the case; that the scale on the magnesium rod of the water heater is too hot and cannot be heated; the safety valve is also damaged, resulting in insufficient water pressure inside the hot water and hot water does not come out of the mixer; The water heater is damaged and only cold water can flow. You can check them one by one and troubleshoot them.