5: 5 tons per hour.
The maximum flow rate of the German Wilo RS25 water pump is 5.5 tons per hour, the maximum lift is 8 meters and the maximum power is 151 watts. transports liquids or puts liquids under pressure.
Water pump flow rate is the volume of water flowing through the pump impeller in unit time when the pump impeller is operating as a water pump. Water pump flow rate is the volume or weight of the liquid delivered. by the pump in unit of time.
Turbine type pump with double regulation
1x. A water turbine is an electrical machine that converts the energy of water flow into rotating mechanical energy. The diameter of the water pump impeller should be twice the diameter of the conventional water turbine. A water pump impeller is a reversible hydraulic machine that operates like a water turbine when the impeller rotates forward and coeven a water pump when it turns in reverse.
The difference between pumped and pumpless pure water machines
This type of water turbine has a diagonal flow turbine.
In the oblique flow turbine, water flows diagonally to the main axis. It is a type of machine developed in the 1950s. It is similar to the axial flow blade turbine. rotate so that it achieves double adjustment, has a wide high-efficiency area, and is applicable to the water height range of 40-700m. This type of turbine is often used as a reversible hydraulic machine and is more common in pumped storage power plants.
Hello, the main difference between a pure water machine with pump and a pure water machine without pump is that they are the same as a booster water pump. You can understand the specific functions, advantages. and the disadvantages ofe make-up water pump. Correctly distinguish the difference between pure water machines with pump and pure water machines without pump.
Generally, the RO membrane used in pure water machines is a low pressure membrane. The general accuracy is 0.0001 micron (one ten thousandth of a micron), and its water pressure should reach about 0.4 MPa. the pure water machine is There is a pump. Only when the boost effect is achieved can normal operation be achieved. The RO membrane of a pumpless pure water machine is an ultra low pressure membrane and the required inlet pressure is smaller, around 0.2 MPa. Its working principle is to reduce the water inlet pressure of the membrane to replace the work of the water pump. The performance of the membrane of a pure water machine without a pump is different from that of ordinary membranes, and its effect is generally worse than that of a water machinepure with pump. At the same time, due to the unstable pressure of domestic tap water, not all users can use pure water machines without a pump at home.
So, for home use, choose one with a pump, which is easy to use and can be used even when the water pressure is low. A pure water machine with pump has a better purification effect than one. pure water machine without pump. Determined by its RO membrane performance, the RO membrane with working pressure basically has better purification effect. It depends on personal needs
I hope this helps you