The method is as follows:
1. You can scratch the anti-counterfeiting barcode on the bottled water, then call to generally check if it cannot be scratched or. the phone cannot be called, this is wrong.
2. You can look at the laser barcode on the seal, which corresponds to the production date. The production date is laser stamped and has a deep mark.
3. Check if the production date on the bottle cap is consistent. Otherwise, it may be a fake.
4. If Nongfu Spring's bottled water is too cheap, be careful. After all, you get what you pay for.
5. Under a 50x magnifying glass, the anti-counterfeiting film words composed of “nongfu” can be seen with the naked eye on the film layer of the barrel cover.
6. The new anti-counterfeiting film cannot be restored once torn off, eliminating the possibility of secondary filling.
7. AllThe bottled waters produced by Nongfu Spring have the words “Nongfu Spring” on the bottom of the barrel and on the edge of the lid.
8. The disposable anti-counterfeiting film bears the product production date. After each barrel is used once, it must return to the Nongfu Spring production base and go through several stages of disinfection procedures before a new one. a code can be obtained and an anti-counterfeiting film.
Is the wholesale price of Robust bottled water 7 yuan?
1. Pay attention to the color of the barrel
The color of normal barrels It is transparent or light blue. If you find that the color of the barrel is too dark, yellow or black, you need to be more careful. This type of barrel may have been recycled too long, or it. may consist of added waste.
2. Look at the appearance and sealing of the barrel
The appearance of good bottled water will not be patchy. The wall of the barrelshould be smooth and free from impurities to the touch. by hand. The barrel wall should also be free of bubbles and stains. Second, look at the barrel seal. Many unscrupulous merchants produce water, and the sealing heat shrink film is baked with a simple device, and the surface is wrinkled and uneven. The sealing film of real bottled water is relatively thick, with clear writing, strong gloss and smooth surface.
3. Look at the bottom of the barrel
Ordinary barrel manufacturers usually write the manufacturer's name and logo, material number, production date, etc. but not the “trash”. Pay special attention to two QS marks: on the one hand, the label of the bottled water must be affixed with the QS mark, on the other hand, the barrel used must also bear the QS mark of the bucket manufacturer, both essential.
4. Look at the joint
The thermal filmThe shrinkage of the fake water seal is usually thin and is often dried with a hair dryer and has uneven wrinkles. The sealing film of real bottled water is thicker, shinier, tighter and smoother.
5. Observe the quality of the water in the barrel
A very simple way is to turn the water in the barrel upside down and observe if there is a large amount of sediment or floating matter inside . Water flows. Has the water in the barrel become cloudy? If so, please do not choose such barreled water.
I can tell you for sure that you will not be able to get 7 yuan even if you go to collect it yourself from the water factory.The wholesale price of water factories water at water stations (agents) is more than 10 yuan. In 2014, the price of major water stations on Beijing's 2nd Ring Road was around 22 yuan. If it is less than 20, you should check anti-counterfeiting. to identifypride authenticity. As a guide, I can tell you that the first price is around 20. The heat shrink film on the second bucket of fake water is usually thinner and lighter in color. It has no shine and doesn't look so tight. , and the surface is wrinkled. The third is the anti-counterfeiting code