Air compressor coolant is used to transfer the energy released by nuclear fission to a boiler or turbine outside the reactor and convert the kinetic energy into electrical energy.
The coolant can be a liquid or a gas and circulates between the nuclear reactor and the boiler by a transfer pump. Sometimes coolant can also act as a speed bump.
Sometimes the coolant and moderator use the same substance. The coolant extracts heat from the reactor core for use, then is cooled and returned to the reactor for recirculation.
Why does the air compressor cooling water need to pass through the water tank?
About 300L/min. If the water-cooled air compressor has cooling water quality requirements, it is better to use soft water thani does not contain too many impurities. If the cooling water contains too many impurities, it is easy to reduce or even block the inner diameter of the pipeline! Therefore, when using a water-cooled air compressor, pay attention to the quality of the cooling water.
The reservoir is the main part of the cooling system, which maintains engine heat through the circulation of coolant through the engine's water channels. In winter, the air conditioner also transfers heat from the water tank to the interior of the car. In the past, large locally produced vehicles and tractors typically used water, which can easily freeze. Therefore, in winter in the north, it is common to see drivers using fire and hot water to warm up the engine in the morning. It's also easy to cook in summer. But today's cars are relatively delicate. Ifwater is used, it will cause greater corrosion of sensors, engine water channels, water tank water pipes, etc. Professional coolants contain chemicals such as alcohol, which lower the freezing point of the solution and increase the boiling point, making it suitable for use in many areas of the car. However, coolants are also classified and the coolants used in different regions are different.