Kubaile p4m cannot be modified to launch.
Kubaile p4m is a non-throwable toy model, and it is also a CS PlayerUnknown's Battlegrounds model. The inner diameter is 7.5 and it can use 7.2-7.5 water bombs without getting stuck. At the same time, as a children's soft bullet gun, Kubeile P4M is safe and harmless for children, so parents can rest assured.
How Kubeile Play works: First pull the top cart back, then press the cart release button down to reset the cart. Each time the trigger is pulled, the upper slide moves back. Each time the trigger slide is pulled, the empty chamber hangs up and the slide reset button must be pressed to reset it. If you need to simulate continuous transmission, you must hold down the reset buttonn and press the trigger. (The cooler and toy charger should be pressed vertically. Press the charger release button to remove the toy charger).
Kubaile p4m multiple
The empty suspension of the water gun is a tactical mechanism, mainly used to remind soldiers that the bullets are exhausted and the magazine needs to be replaced. When the ball is fired, the slide is pulled back to enter the hang-up state, called dry hang-up. The empty state indicates that the bullets have been fired and the magazine needs to be reloaded. This mechanism can help soldiers change magazines in time during combat and maintain continuous firepower of the weapon.
2.5 kg.
Kubaile p4m is a non-throwable toy model, and it is also a CS PlayerUnknown's Battlegrounds model. The inner diameter is 7.5 and it can use water bombs of7.2 to 7.5 without getting stuck. At the same time, as a children's soft bullet gun, Kubeile P4M is safe and harmless for children, so parents can rest assured.
How Kubeile Play works: First pull the top cart back, then press the cart release button down to reset the cart. Each time the trigger is pulled, the upper slide moves back. Each time the trigger slide is pulled, the empty chamber hangs up and the slide reset button must be pressed to reset it. If you need to simulate a continuous transmission, you need to hold down the reset button and pull the trigger. (The cooler and toy charger should be pressed vertically. Press the charger release button to remove the toy charger).