Before the advent of tap water, almost every household in rural areas had a well, and everyday water also came from well water. However, as tap water became more popular in rural areas, wells grew in importance. less obvious.
However, some rural families do not want to install tap water in order to save money. However, they plan to continue using well water. However, using well water is not as convenient as tap water. . How can we make well water like tap water? Let me share it with you below.
How to convert rural well water into tap waterIt is very convenient to use tap water because tap water passes through a household water pipe. Above the domestic water pipe is the water source owned by the water company. extending up tothe rural house, at the water pipe, there will be a valve where the water meter is, allowing farmers to easily calculate the amount of water used each month.
Well water does not flow directly into rural houses like tap water, but we can make one ourselves based on the principle of tap water entering the House. The manufacturing method is actually not difficult.
First place a water pump next to your own well. Connect one end of the water pipe to a water pipe that extends to the bottom of the well. The other end of the water pump is connected to another. water pipe. This water pipe pumps water from the well to your home.
Then place a water tower at the end of the water pipe connected to your house. There are usually three switches at the bottom of the water tower. One is water inlet, the other is water outlet. and the last one isthe water outlet. The water outlet is used to clean the water tower in use.
The water inlet is naturally equipped with the water pipe coming out of the water pump, and the water outlet is equipped with the water pipe flowing to the house. Generally speaking, the location of the water tower should be. the highest position in the house. The reason is simply that the water flows downward.
Finally, install the water outlet pipes to all places in the house that require water, then install a faucet. As long as there is water in the water tower, the water will flow out like tap water.
Some friends may ask: What should we do if there is no water in the water tower? In the past, you could only turn on the water pump and pump water from the well into the water tower. But now it's no longer necessary. There are automatic water pumping equipment on the market. As long asyou buy this type of automatic water pumping equipment, when the water in the water tower is lower than the set water level, the water pump will automatically turn on. to start to work.
Conclusion:It is not difficult to convert rural well water into tap water. All you need to do is purchase a set of principles similar to tap water, pump a water pump into the house well, and install a water tower. , and connect it to water pipes, you can use well water like tap water.
The temperature of the water in the well is above ten degrees. In the summer, you can pump the water and use an air exchanger to lower the room temperature (this is the case). with air conditioners in large factories). However, it cannot be used in winter because the required temperature in the room is higher than the water temperature and cannot be achieved.
Can younst businesses you can't think of, but it's nice to have the idea.