This light is the battery charge light. While crossing the waterway, the generator became water-stained and briefly short-circuited, causing it to stop producing electricity. the water dries, everything will be fine. Use it with confidence.
When the fault light turns on, the car's computer will record the error code. After detection, maintenance personnel will determine the condition of the vehicle. Also check for water in the vehicle's engine oil and use a combustion chamber detector to check for water in the vehicle's combustion chamber. Have maintenance personnel check the engine noise and see if there is any deformation of the connecting rod.
Precautions for driving in water:
When driving on a waterlogged road, you should first ensure that the vehicle has stable and powerful power, so that there is always gasor pressure in the exhaust. pipe to prevent water from flowing back into the exhaust pipe, causing a flameout. When driving, try to drive in a low gear and at a constant speed, and avoid stopping, changing gears, and turning the steering wheel abruptly, etc.
If the car stalls in water, it means that the interior of the engine has been damaged by water. If you continue to try to start the car at this time, the engine piston cylinder may break. , causing fatal damage to the engine.
If the car stalls while wading through water, do not rush to turn on the ignition at that moment. It's best to get out of the car first. check the depth of the water and open the engine compartment to see if the air filter and generator are flooded or if water is splashing on them.
The water flooding the exhaust pipe is not the criterion for judging whether itIt may start a fire. First, the exhaust pipe was filled with water. Regardless of other circumstances, it will not be able to enter the engine when restarting. However, there are comprehensive factors to consider when entering a vehicle into water. We usually say that the reason why a car cannot start when it is soaked in water is mainly because the water will damage the engine and electronic equipment.
First of all, in this engine, what causes water to enter the engine is the air inlet, where the engine air filter is located. When the engine starts, air is sucked in from the air. filter to mix with gasoline, and if the air filter is flooded with water or the air filter is stained with water, water will be sucked into the engine cylinder, causing the engine to be destroyed.
The opening of a car's exhaust pipe is generally 30 to 50 cm. GGenerally, this is a safe water level just before (mo) the exhaust pipe passes. Even if water pours into the exhaust pipe, you can try. also light a fire. But if there are many drain pipes that are not passed, then you need to check if there is water in the air inlet of the engine compartment and generator.
If there is no water, you can try to light the fire, but at the same time I would like to remind everyone that if we really do not have all the experience and confidence, it is better to take a foolproof strategy, take out the key and call for help.