(1) The copper pipe of the water cooler is leaking, making the generator cooling water hard.
(2) The amount of ammonia added in the first stage is too high, causing the conductivity of the generator cooling water to exceed the standard.
(3) Corrosion of copper pipes increases the copper content of water.
(4) If the water exchange volume of the water cooling box is too small, it will also cause the impurity content in the water cooling system to increase.
(5) When using secondary desalinated water as the cooling water source for the generator, pay attention to the water quality of the condensate tank.
Approximately 50 kilograms.
The stator and rotor total about 50 kilograms of copper, or about a fifth to a quarter of the total mass.
The hydraulic generator refers to a generator that uses a hydraulic turbine as the prime mover to convert water energy into electrical energy. When water flows through a turbine, the energy of the water is converted into mechanical energy.