If it's a Z2 DC motor, you'll be fine. Z2 DC motors are manufactured in three types: DC motors, DC generators and DC voltage regulation generators, which are suitable for normal working environments. The electric motor is used for general transmission, the generator is used for general DC power supply, and the voltage regulation generator is used for charging the battery. Xi'an asynchronous motor. The current required when the motor starts is 2-3 times higher. After normal starting, a 3 kW motor can be driven, so it is better to use a 4.5 kW generator. This way, starting will not be difficult, and that. It is also good for the generator, the excess power can also be used to bring other equipment. Gasoline generators generally consist of stator, rotor, end cover, bearings and other componentss. The engine is a machine that converts chemical energy into mechanical energy. Its conversion process is actually the work cycle process, it burns the fuel in the cylinder to generate kinetic energy, which drives the piston of the engine cylinder to reciprocate. It drives the connecting rod connected to the piston and the crank connected to the connecting rod to reciprocate in a circular motion around the center of the crankshaft to produce power.
I would like to ask if a 2.2 kilowatt motor can drive a 5 kilowatt generator to produce electricity
Introduction I would like to ask if a 2.2 kilowatt motor can drive a 5 kilowatt generator to produce electricity at normal speed. If it is a Z2 DC motor, it is possible. Z2 DC motor is made with DC