The glass water filler port of the 2021 Kia K3 is located on the left side of the engine compartment and the bottle cap has a washer symbol as shown in the image. Kia K3 glass water can be filled up to 4 liters, and you can add it according to the actual situation. Glass water is only consumed when used and there is no replacement cycle. The filling cycle mainly depends on the frequency of use.
1 Wiper kettle
2 Battery
3 Throttle valve
4 Oxygen sensor
5 Pot of brake fluid
6 fuse box
7 air filter
8 pot of coolant
Kia K3 Glass Water Adding Tutorial
strong>
1. Directly use the wiper switch button to spray water out of the glass.
2. After spraying the original glass water, add a small amount of waterof the newly prepared glass to the water fill port of the glass.
3. Turn on the wiper switch again to remove any remaining water from the glass.
4. Until the water nozzle stops spraying water for the second time, add about 4L glass of water. At this point, the filling process is complete.
Tutorial for making your own glass of water
1 Preparation materials: dish soap, purified water, 95% medical alcohol and bottles of 'a capacity. more than 2L.
2. First use a bottle to receive 2L of water.
3. Then pour 95% medical alcohol into the bottle, about 500ml.
4. Then add 2 capfuls of dishwashing liquid to the solution. (Washing powder can easily block the water spray hole of the glass, so it should not be used)
5. Shake the solution thoroughly before use.
Methods ofadjustment are necessary to prepare glass water according to seasons
1 There is a lot of sand and dust in summer. You can add a bottle. of dish soap, but do not exceed it, as too much liquid will prevent the glass from cleaning.
2. The temperature is low in winter, and the freezing point can be lowered by adding an appropriate amount of alcohol. With 40-50% alcohol and 50-60% water, the freezing point can be reduced to -25°C, which can meet the climatic needs of most areas.