Okay. Solar descaling agent is originally used for descaling solar energy. It is possible to pour the solvent into the solar energy and leave it to act for a day, but be careful to dilute it with water before putting it, otherwise it will be too acidic and damage the solar energy. solar energy. Solar descaling agent is an effective cleaning agent for solar water heaters. It is used to clean scale and microbial slime formed in the water system (collecting tubes and water storage tanks) of solar water heaters.
How to use water heater descaling agent
Product advantages
Edit
1. is environmentally friendly. The raw materials cause no harm to the human body and can be used directly after cleaning;
2. There is no corrosion on the heat collecting tube, inner tank, water storage tank, coversrts. vacuum tube, rubber sealing ring, plastic parts and other components;
p>
3. Green and environmentally friendly formula, the cleaning fluid can be discharged directly
4. Powerful and effective, the descaling effect can be directly monitored.
How to use
Edit
1. Open the overflow port of the solar water tank or the exhaust hole above the water tank
p>2. Add 2 bottles (1 kg) of descaling agent solution to the water tank;
3. Allow the descaling agent solution to come into complete contact with all parts of the water tank and allow the solution to soak in the water tank. water tank for 2 to 4 hours to remove scale. After complete dissolution;
4. Open the drain and drain the cleaning fluid
5. twice before you can use it normally.
Warm Tips
Edit
1. Different solar water heaters have different structures, please adjust the use according to the instructions (it is recommended to be used by professional maintenance personnel);
2. Heat the water to about 40 degrees for better descaling effect;
3. When the scale is heavy, you can disassemble the collection tube and soak it; , or increase the dose.
4. Clean the solar water heater every three months to ensure it is in good working condition. If it has not been cleaned for more than twelve months, please increase the dosage.
Precautions
Editor
If it comes into contact with sensitive parts such as eyes, nose, etc., please rinse with water .
Importance
Edit
Not cleaning solar energy for a long time will cause
1 The thermal conductivity of scale is much weaker. than that of metal. The thermal conductivity of yousteel yaux is 6 to 1,000 times greater than that of scale. Scale on vacuum tubes will seriously affect the hot water temperature and can reduce the thermal energy conversion rate of solar energy or even make it inefficient. .
2. Scale contains a variety of chemical components. Long-term precipitation and accumulation will increase the number of harmful substances in the water, which may lead to skin allergies.
How to clean scale from solar tubes
Summary: Solar water heaters will have scale if not cleaned for a long time. Scale contains a variety of chemical components. Long-term precipitation and accumulation will cause an increase in harmful substances in the water and may cause skin allergies. Solar descalers can clean the scale and microbial slime formed in the water system of the solar water heater. SO,how to use water heater descaler? Open the water inlet of the solar water heater, add 1 bottle (300 grams) of water heater descaling agent into the water storage tank, perform automatic thermal cycle for 20-30 minutes, open the drain outlet and drain the cleaning fluid. . Let's follow the editor. Let's find out. Scale damage to solar water heaters
1. Heat collection efficiency decreases. The thermal conductivity of scale is less than one percent of that of metal. The thermal conductivity of metal steel pipes is 6 to 1,000 times that of scale. Scale on the vacuum tubes will seriously affect the hot water temperature. Hard scale can reduce the thermal energy conversion rate of solar energy, or even make it ineffective.
2. The probe sensor is prone to failure, the water level detection signal is distorted, the tubeElectric heater has poor heat transfer and the tube is prone to explosions.
3. Hot water is cloudy and impure. Scale contains a small amount of “nitrates and nitrites”, which are toxic and harmful to the human body (carcinogenic). Boiling water is toxic and you should not drink it. »
4. Tartar is a fertile ground for bacteria to reproduce and grow. Hot water contains a large number of bacteria that can cause allergies in the human body.
5. Easily corroded. When there is scale in the water tank, it is easy to cause corrosion under the scale and the water tank is prone to rot and leakage.
How to use solar water heater descaling agent
1. Open the water inlet of the solar water heater
2. Add 1 bottle (300 grams); of this product into the water storage tank;
3. Automatic heating cycleue for 20 to 30 minutes to fully contact the descaling agent solution with all parts;
4. Open the drain and drain the cleaning fluid;
5. Fill the water tank with water, then circulate it for two minutes;
6. Drain the circulating water and the cleaning and descaling job is complete.
Tips:
1. According to the structure of the solar water heater, please adjust the usage method appropriately (it is recommended to be operated by professional maintenance personnel).
2. Heat the water to around 40 degrees for better descaling effect.
Usage: 1 bottle (300 g) per solar water heater.
Recommendation: Clean the solar water heater every three months to ensure that the solar energy is in good working order. If it has not been cleaned for more than twelve months, please increase the dosage.
Note:In case of contact with sensitive parts such as eyes, nose, etc., please rinse with water.
The method of cleaning scale in solar tubes is as follows:
Tools: solar tubes, descaling agent.
1. Open the water inlet of the solar water heater.
2. Add the solar water heater descaling agent to the water storage tank.
3. Automatic heating cycle for 20-30 minutes, so that the descaling agent solution comes into full contact with the hot water lines.
4. Open the drain port and remove the descaling agent.
5. Fill the water tank with water then circulate it for 2 to 3 minutes.
6. Drain the circulating water and clean the scale. That's it.