1. There may not be enough water pressure when water enters. We can install a water increasing pump there so that water can be supplied smoothly.
2. If it is not a water pressure problem, we continue to check if the main water valve at the inlet of The water is open. If it is not opened, water will leak. not be allowed to enter.
3. If the problem persists, check if the water inlet is blocked. Now most water inlets are daily capacity pipes. The water line may be accidentally blocked. the interface. Check When doing this, you have to cut the interfaces one by one, which is tedious to use.
4. If it is not the above problem, we will check if it is because the water level sensor is faulty, causing d error display and preventing water filling.
5. Usuallyent, if the solenoid valve fails, it will also cause the inability to fill the water.
6. There is too little water in the water tank, but the temperature is very high. The counter is too high at startup. In order to protect yourself, the counter is too high. water cannot be filled.
7. The instrument is defective, resulting in the inability to fill water.
Having solar water heaters can make our life more convenient, and solar water heaters are relatively simple, safe, energy-saving and environmentally friendly, so they now belong to many families . However, solar water heaters are also prone to problems. It is easy to find yourself in a situation where water cannot be supplied. What is the reason why water cannot be supplied?
1. What should I do if the solar water heater is not supplying water?
1. Sometimes the water does notcannot be supplied, perhaps because the water pressure is relatively low. We can install a booster pump on the pipes of the house. You should also check the upper and lower water lines, especially if the suction hose is damaged. If so, you should replace it in time and then try to refill the water again.
2. If you find that water still cannot be supplied, there may be a leakage problem between the water tank connection part and the water supply pipe. We need to plug the leak to be able to plug the leak. supply water efficiently.
2. Reasons why solar water heater cannot fill water
If there is a problem of not filling water, there are many reasons. The most common reasons are:
1. The vacuum tube may be damaged. The reason why it is damagedis that cold water is applied when the temperature is too high at that time because the internal temperature has reached over 1000°C. 200 degrees, it will burst once it meets cold water, which will damage the pipeline. Therefore, it is necessary to change the water filling time. Generally speaking, fill the water at night or in the morning when the sun is not out, the temperature is relatively low, and it is not easy to explode.
2. It is also possible for the upper and lower water pipes to be blocked, which is more common in winter. The main reason is that insulation measures are not taken, so even if water is supplied, it leaks later, making the illusion impossible.
3. It could also be a problem with the solenoid valve or water pressure. If it is a solenoid valve, simply replace it with a new one. If the water pressure is relativeive low, purchasing a booster pump can ensure water supply.
Editor Summary: If the solar water heater can't supply water, don't worry, find the cause first. The most likely problem is that there is a problem with the vacuum tube and the upper and lower water. pipes that need to be replaced in time.