Solar pipe explosions have quality problems caused by the manufacturing of the pipe itself, but more often they are caused by adding water at high temperatures and under strong light.
We know that the collecting tube is made of glass, the outer layer is a vacuum layer, and the inner layer is filled with water. The vacuum layer of a good tube can reach 4 pressures, and that's almost 2 pressures. In a high temperature and bright light environment, the temperature of the empty tube can reach more than 200 degrees. If you suddenly encounter cold water with only a few tens of degrees Celsius, the vacuum layer will shrink sharply. When the glass tube cannot resist removal, an explosion will occur. Therefore, if you want to avoid pipe burst accidents, you need to buy genuine solar power. Its glass has a relatively high resistance and is notnot subject to burst pipes. The most important thing is to master the moment of launching. Try to avoid getting on the water when the temperature is high and the sun is shining. It is best to get on the water in the morning when the sun is not out. and half an hour after sunset in the evening.