There are several situations of solar water leakage, as follows:
1. The vacuum tube leaks when you use it in spring and summer, remember that when there is no water in the barrel, you can do it. choose to use it only at night or early in the morning. Water, the temperature in the newly installed solar tube will rise very quickly at noon, and sudden application of cold water will break the vacuum tube.
If the vacuum tube is cracked and leaking, the solution is to close the water supply valve and turn off the power supply for automatic water supply. Once the water in the bucket has drained, remove the broken tube. It is recommended to use lubricant. Apply it to the vacuum tube, first hold the vacuum tube, insert the vacuum tube into the water tank until the other end of the vacuum tube leaves the bracket, then tilt the tube broken. The vacuum tube is broken and needs to be repairedreplaced by a new one.
To replace the installation method, first place a dust ring (black leather ring) on the non-tip of the vacuum tube, apply detergent (diluted is fine ) on the non-tip, then insert it into the bucket. Remove it again and press the tip of the vacuum tube against the plastic backing of the holder.
2. The upper exhaust is leaking. When the solar power is filled with water, the normal situation is that the water overflows and leaks first. If the water supply valve is not closed in time, the water. will flow quickly and the overflow will be slow. Excess water will be discharged from the upper exhaust, which is normal.
If the upper exhaust pipe is emptied first, you can remove the overflow pipe 1-2 cm downwards (the overflow pipe does not require welding) or lift the upper exhaust pipe approximately 1 cm upwards.
3. The bucket lid is leaking. The hatchThe bucket key usually does not leak, the vacuum tube silicone ring may be broken. material and flows out of the bucket lid. If the silicone ring is not broken, replace it within the warranty period.