Solar Vent Leak Repair: 1. The solar return pipe is too long or not smooth. You can adjust and clean the solar return pipe. 2. If the solar collector fails, you can repair the solar return pipe. The sensor is covered with a waterproof protective device; 3. If the tap water pressure is too high, install a transformer to adjust the tap water pressure to the standard water pressure.
This answer applies to most water heater models Midea F6030-A6X (HEY), Haier EC6003-JT1 (U1) and other brands.
The hole on the side of the solar water heater is leaking
1. What to do if the solar water heater exhaust hole is leaking< /p>
1. The tap water pressure is relatively high, and it will splash during the water filling process, causing water to leak into the exhaust hole. At this point, the tap water pressure should bee adjusted in time to keep it at standard water pressure.
2. If the water return pipe is relatively long or is blocked, water will not flow from the return pipe when it is full, causing a leak through the vent hole. At this time, it is necessary to smooth the return pipe in time or shorten the return pipe appropriately.
3. If the water supply valve or solenoid valve of the solar water heater is not closed tightly, the water supply will also be slow, causing water to enter the drainage hole. If this phenomenon occurs, the water supply valve should be closed tightly in time or the problem parts should be repaired.
2. How to maintain solar water heaters
1. The surface of the solar water heater should be cleaned regularly to ensure the surface is clean. In rainy weather, solar water heaters can clean themselves. This ensures that the effiheat collection efficiency of the water heater will be higher.
2. Solar hot water generally needs to be cleaned and disinfected when it is about 2-3 years old to ensure water quality and normal use. In addition, it can also be used for manual disinfection at ordinary times, making it safer to use.
3. You can also purchase a special disinfectant containing chlorine, pour it along the water inlet of the water heater, and soak it for a while to achieve better disinfection effect and ensure normal use in the later period .
1. The sealing ring of the solar water heater is damaged; 2. The water switch of the solar water heater is not closed tightly; 3. The heat pipe may be broken; The head pipe of the solar water heater is loose; 5. The temperature of the solar water heater is too high; 6. The water pipe is blockedqueated 7. Because the tap water pressure is too high, it will splash during the filling process; , which will cause water to flow out of the water tank from the vent before it is full. 8. The solar water heater exhaust hole leak is most likely caused by the water supply valve or magnetic valve not being closed. tightly, resulting in slow water supply. When the water is full, it will flow out of the exhaust hole. Suggested solutions: 1. It is best to replace the seal ring. 2. Simply turn off the water supply switch. 3. Ask professionals to replace the vacuum tube. 4. Reconnect or replace the pipe fittings. 5. System circulation is poor and air is blocked. It is necessary to adjust the installation position of the pipeline so that the pipeline faces the direction of water flow. The inclination of the machine afin order for the fault to be eliminated. 6. Unblock the hot water pipe of the solar water heater. 7. Adjust the tap water pressure of the solar water heater to the standard water pressure. 8. Turn off the water supply valve or repair defective parts.