Integrated solar power is solar power in which the water tank and collector are connected together. Household integrated solar power has multi-stroke vacuum tube type integrated solar power. The vacuum tube is directly inserted into the water tank. -pressure resistant and relatively inexpensive.
Of course, there are also pressure-integrated and flat panel solar products, but they are relatively rare and are unconventional products.
Split solar means the water tank and collector are separate. Household split solar is generally divided into wall-mounted balcony and 80-120 liter wall-mounted balcony. smaller capacity. Rooftop split solar panels are generally available in sizes ranging from 150 to 500 liters. Split solar panels are mostly pressure resistant, with more flat panels and some fabricants producing vacuum tubes. Split solar panels are more expensive, and the price of split solar panels with the same volume is 3-6 times that of integrated solar panels.
1. Before installation, first choose the installation location, ensure that the installation location of the solar water heater is not a residential activity place, and that the installation site meets the product requirements. For example, wall hanging. the installation must be a solid wall with a thickness >10 cm and a capacity of 10 cm. It is preferable to install a more solid support for installations over 80 liters since the water tank and the collector are separate, the collector can be "recessed" in sunny places such as; such as balconies, walls, etc., and the water tank can be installed as needed. If necessary, it can be placed in the kitchen, bathroom, etc. Since theWater supply and drainage are inside, the water heater is no longer afraid of the intense cold in winter. It has many advantages such as wind protection, antifreeze and high thermal efficiency. It greatly reduces the building restrictions on the use of solar water heaters and makes it comfortable to use. In appearance, the collector is organically integrated into the building. While neat and beautiful, it avoids the dangerous factors caused by installing traditional solar water heaters on the roof of the building. And because the water tank is very close to the water outlet. , it saves water while saving water and greatly improves the utilization rate of hot water. 2. If there is a wall bracket or extending part outside the wall and it faces the sun, the collector can be fixed there and reinforced with a stainless steel tripod and extended expanding nails . The longThe thickness must exceed the thickness of the wall; 3. If there is no wall bracket, you can use stainless steel brackets to fix the collector on the wall facing the sun. 4. If you encounter existing structural obstacles in the building, such as some high-rise walls with layers of insulation on the exterior, the real estate department will not do this. Not all places can be installed. For example, under the balcony, where there is no insulation layer, a beautiful and practical location can be determined for the owner to install the balcony wall-mounted solar 5. You. can refer to the installation method of air conditioning; 6. If it cannot be installed, you can choose an external solar water heater; 7. The final step is to find professionals from the manufacturer to take care of the construction;