If you want to make the water heater visible in PS, there are several things you can start with.
1. Use curves to adjust light and shadow to make the overlay clearer.
2. Use hue and saturation to adjust the color of the entire image.
3. After processing, you can copy a layer. Then darken the entire screen. You can use color gradients or curves.
4. After adjusting, add a layer mask. Use a brush to paint and erase the parts of the water heater that need to be highlighted.
5. You can also use the blur tool or blur filter appropriately, in combination with mask processing.
What should I do if the solar water heater freezes?
I think the ten solar water heater brands with the best reputation include Huangming, Tsinghua Sunshine, Haier, etc. They are very appreciateds for their high efficiency, environmental protection, energy saving and high quality. and other characteristics, and have high popularity and market share have won wide recognition among consumers.
Generally speaking, it takes 15 to 30 minutes to thaw after entering tropical areas. Turn on the hot water tap and turn on the tropics at the same time. When the hot water comes out, turn off the tap. The maximum heating temperature in the tropics is 70 degrees. The power is 25 watts per meter.
According to experience, some citizens can open the hot water tap of the solar water heater when the temperature is below zero and let it drip slowly to keep the solar water flowing no problem. prevent solar pipes from freezing.
In winter, if no one lives in the house, the exterior pipes must be drained and the robinand main water inlet must be closed. The water mixer handle must be in the hot water and open position. Even in harsh winter, if the vacuum tube is air-dried without water for more than 1 hour, it cannot be refilled to prevent the tube from bursting.
Detailed information
Notes
1 When installing a solar water heater, there may be a smell of dust or oil in the water. Hose when you use it for the first time, you can first open the faucet and remove the debris.
2. The water stored in the solar water heater should be discharged regularly depending on local water quality conditions. Drain time can be selected in the morning when the sensor temperature is lower.
3. The surface of the solar water heater should be wiped regularly depending on the amount of dust in the area. It can be cleaned when it rains. Keep the knowledgerface of clean water heater can get higher heat. collection efficiency.
4. When hot water is not used for several consecutive sunny days, the hot water temperature will be very high. When using the solar water heater, please turn on the cold water first, then turn on the cold water. hot water to avoid burns.
5. There is usually a filter device at the outlet end of the faucet. Scale and debris in the water line accumulate on this screen. It should be removed and cleaned regularly to increase water flow. smooth the flow.