Wastewater disposal steps:
1. Unplug the power plug, wrap the plug with leakage protection and place it on the water heater body. Seal the socket. To prevent water from entering.
2. Close the water inlet tap and remove the mixing tap.
3. First place a large bucket under the sewage outlet, remove the red plastic cover outside the sewage outlet next to the water outlet pipe, and use a wrench to remove the outlet nut Wastewater. At this time, all the water from the water heater flows into the bucket.
4. When I saw that the running water no longer had pressure and the water was starting to change color, I changed the connection on the bucket. It didn't take long for the sewage to flow out and the water in the electric water heater to drain.
5. Pour the cleaning solution directly from the waste water outlet with a syringe or similar, plug in the sewage outlet again, plug in the water outlet, connect the water inlet pipe, and add about 3 half buckets of water. And the process of adding water is sometimes full of water and sometimes little water.
6. After about 30 minutes, open the drain outlet to drain the water and add water several times to flush the water heater three times.
7. Reinstall the water heater and replace the cap. This concludes the wastewater cleaning work.
Can the water heater drain outlet really be opened at will?
1. Unplug the power plug, wrap the plug with leakage protection and place it on the water heater body. Seal the socket. To prevent water from entering.
2. Close the water inlet tap and remove the mixing tap.
3. First place a large bucket under the sewage outlet, remove the red plastic cover outside ofthe waste water outlet next to the water outlet pipe and use a wrench to remove the waste water outlet nut. At this time, all the water from the water heater flows into the bucket.
4. When I saw that there was no pressure in the running water and the water started to change color, I changed the bucket connection. It didn't take long for the sewage to flow out and the water in the electric water heater to drain.
5. Pour the cleaning solution directly from the waste water outlet with a syringe or similar, plug in the waste water outlet again, plug in the water outlet, connect the water inlet hose and add about two thirds of 'a bucket of water. And the process of adding water is sometimes full of water and sometimes little water.
6. After about 30 minutes, open the drain outlet to drain the water and add water several times to flush the water heater three times.
7. Reinstall the heaterffe-water and replace the cap. This concludes the wastewater cleaning work.
Water heaters are often used in our homes. If there is no hot water from the solar water heater in winter or rainy days, it is very convenient to use the water heater at that time. Water heaters are relatively durable. Many families have used water heaters for many years. Many people don't know that water heaters actually contain a lot of dirt that needs to be cleaned after prolonged use.
Everyone who boils water knows that a little scale will build up on the kettle. Every time the water heater is used, it has to heat a lot of water, so it usually accumulates a lot of scale and sediment. tap water. These messes need to be cleaned frequently. If left uncleaned for a long time, they can clog pipes andaffect the quality of our bath water.
The way you clean it is therefore very important. Water heaters cannot be cleaned as directly as kettles. For cleaning, do you need to find a professional master to clean it? Actually this is not the case, the water heater was designed with the problem of sewage discharge in mind, so there is a sewage outlet on the water heater, but many people haven't used it and don't know it either. Let me tell you about it next. The location of the waste water outlet is usually at the bottom of the water heater. It is a large round projection. However, there may be some small differences in the placement of different brands and styles. Take a closer look. If you are unsure, you can also seek advice from the pros.
After finding the sewage outlet, you can prepare to drain the waterworn. The water heater must be turned off before draining, so be sure to unplug it first and then drain the waste water. In order to prevent dirty water from flowing to the ground, everyone should place a basin under the sewage outlet to catch the dirty water before draining the sewage. After placing the basin, you can open the cover of the sewage outlet and then the sewage. will flow. When no more waste water is flowing out, the lid can be closed. Once everyone has learned this method, you can drain the water heater regularly. However, you don't need to drain the water frequently. You can empty it once every few months. If you feel that the drain is not clean, you can also extend it. a hose to the drain outlet to eliminate the dirt that comes out. Regularly cleaning the dirt from the water heater can make the hot water cleaner. The water from the water heater mayalways be cleaned when we take a bath in the rain. This also prevents scale from blocking the pipes, which can extend the life of the water heater. water heater calculated in this way, regular drainage of waste water is very useful.