Solar water heaters are an increasingly popular method of supplying hot water. They are favored by consumers due to their eco-friendly and energy-saving properties. However, when using solar water heaters, due to factors such as long-term use and weather changes, water will flow out of the solar drain, resulting in certain problems in daily use . Let's see how to solve the problem of solar sewer dripping.
1. Check if the sewer pipe is blocked.
During use, sewer blockage may be one of the main reasons for water flow from the solar sewer. At this point, you can use professional sewer unblocking tools, such as sewer cleaners, to unblock the drains. If your sewer lines are clogged with solid debris, you can try unblocking them.clean with chemicals. However, it should be noted that chemicals should be used in accordance with the instructions given in the instructions in order to avoid harm to health.
2. Check if the tap is closed
While using the solar water heater, if you find water dripping into the drain, it may be because the tap is not closed . In this case, simply turn off the tap.
3. Replace the sewer seal ring
During long-term use, the sewer seal ring may be worn or aged, causing water to drip into the drain. At this point, the seal ring should be replaced with a new one to solve the dripping problem.
4. Check if the solar water heater pipe connection is loose.
If the solar water heater pipe connection is loose, it may also cause water to drip from the sewer. At this stage,you can check whether the pipeline connection is loose and adjust the angle appropriately to keep it firmly connected to avoid dripping problems.
In short, solar sewer drips are a relatively common problem, and the solution is relatively simple. You just need to investigate one by one, find out the problem and solve it. During daily use, you should also pay attention to regular care and maintenance to extend its service life.