This is a vague question. You need to consider the output power of the solar power generation equipment and how much energy you need to use for welding, as long as the output power of the solar power generation equipment is greater to the output power of solar power generation equipment. welding power, it can be used for welding.
In addition, even if the power of the former is lower than the power of the latter, but the correlation is not too large, energy storage equipment and conversion equipment can also be added for welding.
Generally speaking, the output voltage of the former will not be too high, so conversion equipment based on the principle of switching power supply should be required to change to the corresponding voltage. So this will cause power loss issues. the power of p equipmentSolar power generation is required. The power is greater than the welding power by a certain value. If it is not higher, energy storage equipment is required.
350℃. Solar Energy: The sun is a huge source of energy. It emits approximately 3.8 × 10 MW of energy into space in the form of light radiation every second. After sunlight is reflected and absorbed by the atmosphere, it is projected onto Earth. , , and 70% are transmitted to the ground. The temperature of the automatic solar panel welding box is 350°C. Do not touch it with your hands.