Scaling is caused by prolonged use of certain containers which are often in direct contact with water, and a thick layer of impurities will develop on the interior wall. Many friends don't know how to clean scale with solar energy. to learn together.
1. Remove the vacuum tube, handle it carefully and do not break it.
2. Pour out the scale and clean the scale on the inner wall of the solar vacuum tube. This requires the use of a professional acid descaler.
3. Pour in acidic descaler and soak for about 10 minutes.
4. Then use the brush to pull back and forth to remove the remaining tartar, then rinse twice with clean water.
How to clean scale from a solar water heater that has been used for many years?
No matter where solar energy is used, there will be scaling problems. Under normal circumstances,tartar should be removed once a year. Otherwise, the solar energy temperature will be worse than the previous one. If the water quality is poor, do not choose it. Three-lumen tube (tube within tube). Currently, there are three methods of anti-limescale and solar descaling:
(1) Add a magnesium rod with scaling function when installing. But it has no effect. Even the magnesium rod itself will be chalky. There is no difference between installed and not installed.
(2) Simply add a descaling agent. I do not recommend this method. General descaling agents are acidic or alkaline and will corrode the water tank liner and vacuum cleaner. tube The scale cannot be removed completely, and the tube must be removed after 24 hours to drain the scale.
(3) Physical descaling method. This involves unplugging the vacuum tube and drying it in the sun fornt two days, then install it. Before installing the tube, inject water into it. the solar panel inside, in order to eliminate scale in the water tank. This method will not cause damage to solar energy, save money and completely eliminate scale.
How to clean the scale inside the solar water heater and how often should it be cleaned?
Solar water heater is a hot water supply installation that many families choose. After all, compared with gas, natural gas, electric water heaters and other facilities and equipment, solar water heaters can save a lot of living expenses. However, compared to some other installations, electric water heaters and solar water heaters need to be cleaned regularly. In particular, solar water heaters must be cleaned to ensure their efficiency andt their operating condition. How to clean it?
1. White vinegar for descaling.
Drain all water stored in the solar water heater, then remove the vacuum tube. Remember to handle it with care. After all, this thing is very fragile, so be careful. Then pour an appropriate amount of white vinegar into the vacuum tube. If conditions permit, you can purchase a longer brush in advance for scrubbing. Repeat this 2-3 times and finally use clean water to wash and rinse. This can remove tartar that has accumulated over a long period of time.
2. Solar descaling agent.
In the market we can buy special solar descalers. The method of use is to pour the solar descaling agent into the water inlet of the solar energy from here, and then start to use the solar energy, and pass the water containing thedescaling agent through all the channels inside the solar power, then pour all the water into the water tank. Empty everything, then run the water again, drain it again and repeat this operation 2 to 3 times to remove the scale.
3. Cleaning by professionals.
If you are afraid of problems if you clean it yourself, the best way is to hire a professional to clean it. This way you can guarantee the quality and professionalism of the cleaning. and it will last 2-3 years. This has only been done once so it's great value for money.
For solar water heaters, it is better to clean them once every 2-3 years, otherwise it will easily affect its lifespan and use quality, or even destroy the effect of the vacuum tube, and the water temperature will not be high. And if it is not clear for a long time, the quality of the eau will be affected, which may cause your own skin problems.
Clean once a year.
1. Tools/Materials
Solar energy and water.
2. Methods/steps
1. Carefully remove the dust seal ring on top of the header tube.
2. Remove the black collection tube.
3. Pour the water into the collection tube and pour out the scale at the same time.
4. Remove the rubber sealing ring inside the water tank mouth.
5. Remove large pieces of tartar.
6. Then rinse the scale from the water tank with plenty of water.
7. Install the rubber seal ring.
8. Install the collector tube.
9. Press the dust ring.