If the outlet pipe of the solar water heater is frozen, it is not recommended to plug it in to boil water. Solar water heaters are water heaters that rely on collecting solar energy to heat water. Usually, the order in which solar water heaters freeze is: water pipes, collector pipes, and water tanks.
Some solar water heaters have a pipe heating feature, which means that when the pipes freeze, the electrical connection can defrost them. If it has pipe heating function, it can be turned on. Otherwise, it is not recommended to turn on the power to boil water.
If the pipe is found to have frozen but not yet cracked, it can usually be cleared automatically once the temperature rises. You can also use a hair dryer to blow on the water pipe, or wrap a towel around itfrom the water line, then slowly pour it with lukewarm water. Do not cook it on fire, hit the water pipe, or scald it with boiling water, because. this will cause the pipe to burst. Multiple freeze blockages can easily cause pipes to freeze and crack. Pipe insulation measures must therefore be reinforced.
Detailed information:
1. When installing a solar water heater, there may be a smell of dust or oil in the water pipe. When using it for the first time, you can open the faucet to remove debris. First of all.
2. The water stored in the solar water heater should be discharged regularly depending on local water quality conditions. Drain time can be selected in the morning when the sensor temperature is lower.
3. The surface of the solar water heater should be wiped regularly depending on the amount of dust in the area. It can be cleaned when it rains. Keeping the water heater surface clean can get higher heat. collection efficiency.
4. When hot water is not used for several consecutive sunny days, the hot water temperature will be very high. When using the solar water heater, please turn on the cold water first, then turn on the cold water. hot water to avoid burns.
5. There is usually a filter device at the outlet end of the faucet. Scale and debris in the water line accumulate on this screen. It should be removed and cleaned regularly to increase water flow. smooth the flow.
6. Solar water heaters should be cleaned, inspected and disinfected on average every two to three years. Users can also perform somedisinfection work, such as purchasing disinfectants containing chlorine and adding them. At the water. Pour it into your mouth, soak it for a while, and then release it, which can achieve a certain disinfectant effect.
7. Solar water heaters need to be cleaned inside the vacuum tube every two to three years on average to prevent scale from forming inside the vacuum tube and affecting the heat absorption effect.
8. If the solar water heater is equipped with special instruments, please pay attention to lightning and electricity protection. Do not take a shower and unplug the electric heater during lightning.
Can be plugged in directly.
Solar water heaters absorb heat from the sun using solar collector panels to heat the water. When it rains for a long time, electric supplementary heating is necessary. Some water heatersThe rooms are equipped with electric heating pipes, so when the solar energy is insufficient or you feel the water temperature is low, the water temperature can be increased through electric heating. Nowadays, good solar has anti-electricity walls and is relatively safe. Solar energy in addition Hot outlets are all equipped with protection against leaks. It is more convenient to use. For normal use, simply disconnect the power supply to the electric heater. Electric space heater is similar to the heating method of electric water heaters. Using electricity to directly heat water temperature also carries certain risks. After adding an electric heater to a solar water heater, its heating method is immersion heating. During daily use, leaks and dry burning are likely.likely to occur.
Does the solar water heater need to be plugged in? How to use the plugged-in solar water heater?
When using the electric water heater, you need to turn on the electric heater. Change and adjust the temperature. It can automatically detect the water temperature when it reaches 56 degrees, but when it cannot reach the set temperature, it will automatically start the electric heating and heat it to the set temperature. Users should unplug the electric heater switch before taking a shower, which can reduce leakage accidents. As long as the weather is not extremely bad, the water in the thermal insulation tank can be automatically heated to 40 degrees by solar energy. There is no problem swimming at this temperature.
At present, solar electric auxiliary heating is a relatively mature technology used insolar water heaters in regions with relatively cold northern weather, choosing this method allows users to use it with confidence in winter. However, electric heating of solar water heaters poses certain risks. This reminds users that when choosing, they should purchase solar water heaters with electric heating produced by regular manufacturers to ensure good quality. Additionally, try to use the electric heating system as little as possible during normal hours, and be sure to turn off the electric heating when taking a bath to ensure your safety.