The solar water heater is a device that provides domestic water by using solar energy to heat the water. In the structure of a water heater, the insulating layer is a very important element. It can prevent water temperature loss, improve water heater efficiency and save energy. Here are several ways to keep solar water heaters warm.
The first type: water heater liner insulation
This insulation method involves placing the insulation layer directly on the water heater liner. Traditional insulating layer materials include plastic foam, fiberglass, etc., but these materials are sensitive to moisture and may cause the insulation effect to decrease or completely fail after long-term use. Therefore, it is currently recommended to use polyurethane as the insulating layer material. In addition to having the best effect ofthermal insulation, it is also more ecological and healthier than other materials.
Second: Reduce heat loss
The exhaust pipe and water pipe routing of the water heater are also the main reasons for heat loss. Therefore, heat losses can be reduced by reducing the length of water pipes or changing the route of the pipes. In addition, when water pipes are connected to the water heater, using insulation materials to wrap the water pipes can also effectively reduce heat loss.
Third option: Install a solar water heater insulation blanket
The solar water heater insulation blanket is a device that can be used as a protective layer around the solar water heater . Its main purpose is to protect the solar water heater from natural factors such as rain and strong winds. The material of the coverThermal insulation circle is mainly made of plastic or rubber, and the surface is covered with organic glass or reflective film to achieve excellent thermal insulation effect. At the same time, it can also reduce heat loss and improve the efficiency of solar water heaters.
In short, the above methods are all ways to effectively improve the insulation effect of solar water heaters and save energy. Users can choose the appropriate insulation method according to their actual situation. Only careful maintenance of the water heater can ensure its best operation.
Solar insulation is divided into solar water tank insulation and pipe insulation. Solar water tank insulation does not require electricity, and the insulation performance relies on the polyurethane insulation between the inner and outer shells of the water tank. ThisMeanwhile, there are three types of pipe insulation: one is for draining the pipe, which does not require electricity, the other is for the antifreeze cycle, which does not require electricity, it 'that is to say there is electric heating. tape on the outside of the pipe, which consumes electricity. Each meter of electric heating tape is about 15W. The commonly used heating tape is a self-limiting temperature heating tape, which consumes limited power and can be maintained in a normally open state.