The solar pipeline should not be very complicated. Please check the diagram and find out the reason why water is not coming out in two steps:
1. it can If there is water, then there is no blockage in the pipeline from solar to solenoid valve
2 Since there is no problem with the pipeline here from the solenoid valve, then the sprinkler; the head is straight. What needs to be checked is the hot and cold water separation valve (if it is not a dual purpose valve, a separate valve like in the photo is easier to check). Turn on the cold water and sprinkler head first, then turn on the hot water and turn on the sprinkler head. If there is hot water, the problem is solved. If there is no hot water, there is a problem with the water diverter valve.
What should we pay attention to when decorating interiors?
The water pressure on the first and second floor being noNormally, it is recommended to install the booster pump on the third floor. It is not recommended to connect solar and electric water heaters in series. on the fourth floor, because the operating pressures of the two water heaters are different, so it is necessary to connect them in series. Adding multiple valves is very inconvenient. Simply install two sets of shower faucets in the fourth shower room. ground. Please adopt it.
The load-bearing walls cannot be broken, the materials used to seal the balcony must be of good quality and special attention must be paid to hidden technical constructions.
Decorating a new home is not an easy task. It not only takes a lot of time and money, but also requires a lot of things when decorating to ensure the quality of the decoration. The first step of decoration is to renovate the bodymain. Before building walls, everyone must first understand which interior load-bearing walls cannot be broken, otherwise it will cause safety hazards. In addition, everyone should also allow time to break the wall reasonably, otherwise it will hinder the lives of others.