1. First of all, the Linorite solar water heater uses a temperature and water level sensor, which must be installed inside the water tank.
2. Tools that need to be prepared include wrenches, Phillips screwdrivers, power drills, etc. Materials include temperature and water level sensors, wires, fixing screws, etc.
3. Then use a wrench or Phillips screwdriver to open the side cover of the water tank and slide the wires out.
4. Then install the temperature and water level sensor into the mounting hole inside the side cover and secure it with mounting screws.
5. Then connect the sensor wires to the wires inside the water tank. You can use a soldering iron to solder or use terminal blocks to connect.
6. Then fill the water tank with water, then turn on the power and test whether theWater temperature and level sensor can work normally.
7. After the final test is completed, close the side cover of the water tank to ensure a good seal.